The NASA Orbital Debris Program Office (ODPO) develops, maintains, and updates orbital debris environmental models, such as the NASA Orbital Debris Engineering Model (ORDEM), to support satellite designers and operators by estimating the risk from orbital debris impacts on their vehicles in orbit. Updates to ORDEM utilize the most recent validated datasets from radar, optical, and in situ sources to provide estimates of the debris flux as a function of size, material density, impact speed, and direction along a mission orbit. On-going efforts within the NASA ODPO to update the next version of ORDEM include a new parameter that highly affects the damage risk – shape. Shape can be binned by material density and size to better understand the damage assessments on spacecraft. The in situ and laboratory research activities at the NASA ODPO are focused on cataloging and characterizing fragments from a laboratory hypervelocity-impact test using a high-fidelity, mock-up satellite, DebriSat, in controlled and instrumented laboratory conditions. DebriSat is representative of present-day, low Earth orbit satellites, having been constructed with modern spacecraft materials and techniques. The DebriSat fragment ensemble provides a variety of shapes, bulk densities, and dimensions. Fragments down to 2 mm in size are being characterized by their physical and derived properties. A subset of fragments is being analyzed further in NASA’s Optical Measurement Center (OMC) using broadband, bidirectional reflectance measurements to provide insight into the optical-based NASA Size Estimation Model. Additionally, pre-impact spectral measurements on a subset of DebriSat materials were acquired for baseline material characterization. This paper provides an overview of DebriSat, the status of the project, and ongoing fragment characterization efforts within the OMC.

Existing DOD and NASA satellite breakup models are based on a key laboratory test, the 1992 Satellite Orbital debris Characterization Impact Test (SOCIT), which has supported many applications and matched on-orbit events involving older satellite designs reasonably well over the years. To update and improve these models, the NASA Orbital Debris Program Office, in collaboration with the Air Force Space and Missile Systems Center, The Aerospace Corporation, and the University of Florida, conducted a hypervelocity impact test using a high-fidelity mock-up satellite, DebriSat, in controlled and instrumented laboratory conditions. DebriSat is representative of present-day LEO satellites, having been constructed with modern spacecraft materials and techniques. The DebriSat fragment ensemble provided a variety of shapes, bulk densities, and dimensions. Fragments down to 2 mm in size are being characterized by their physical and derived properties. A subset of fragments will be analyzed further in laboratory radar and optical facilities to update the existing radar-based NASA Size Estimation Model (SEM) and develop a comparable optical-based SEM. Thoroughly understanding size estimates from ground-based optical and radar sensors is one of the key parameters used in assessing the environment and the risks that debris present to operational spacecraft. The data will inform updates to the current NASA Standard Satellite Breakup Model (SSBM);, which was formulated using laboratory and ground-based measurements of on-orbit fragmentation events to describe an average breakup for spacecraft and upper stage collisions and explosions. DebriSat will extend the laboratory data ensemble. The DebriSat shape and density categories provide a baseline for non-spherical projectile hypervelocity impact testing for damage assessment. The data from these tests, simulations, and analyses will be used to update the NASA Orbital Debris Engineering Model (ORDEM) with more realistic simulations of catastrophic fragmentation events for modern satellites and to assess the risk posed by the orbital debris environment. This paper provides an overview of the project, updates on the characterization process, and the NASA analysis status.

In this paper, we investigate the ability of the Arecibo Observatory to characterize the orbital debris environment and compare it to the primary instrument used by NASA’s Orbital Debris Program Office, the Haystack Ultra-Wideband Satellite Imaging Radar (HUSIR). Arecibo’s location (18.°3 N) increases the percentage of observable orbits (relative to HUSIR) by 27%, which gives Arecibo access to a much larger and previously unmeasured portion of the environment. Due to the recent collapse of the Arecibo dish, in addition to exploring historic capabilities of the Legacy Arecibo Telescope, estimates of the performance of the proposed Next Generation Arecibo Telescope (NGAT) are explored. We show that the current NGAT design could have a sensitivity comparable to the Goldstone Orbital Debris Radar, currently NASA’s most sensitive orbital debris radar. Additionally, design suggestions are presented that would significantly improve the capabilities of the NGAT for orbital debris investigations. We show that, with appropriate hardware upgrades, it would be possible to achieve a minimum-detectable debris size as small as 1 mm. These capabilities would allow data from Arecibo to significantly improve short-term debris environment models, which are used to inform spacecraft design and operations, particularly for orbital debris smaller than 3 mm, which pose the highest penetration risk to most spacecraft.