Multidimensional gas-chromatographical analysis of various tensides of natural or synthetic origin in cosmetic products is demonstrated. Comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry allows the qualitative and quantitative determination of alkyl polyglucosides (AG), fatty alcohol ethoxylates (FAEO), fatty alcohol sulfates (FAS), fatty alcohol ether sulfates (FAES) and cocamidopropyl betaines (CAPB) in shower gel and cleaning agents. The samples were aliquoted in two parts. The first part was silylated, diluted and analysed; then, in order to detect anionic tensides (FAES, FAS) too, the second aliquot was hydrolysed before being silylated for analysis. Because of their amphoteric character, the betaines can only be analysed by gas chromatography after thermal decomposition in the injector, which leads to the corresponding amidoamines among other products.

Pulsed amperometric detection following micellar electrokinetic chromatography has been applied successfully to the direct detection of alkyl polyglucosides (APGs) in shampoos and other industrial products without prior conversion to highly absorbing or fluorescing derivatives. For electrochemical detection, it is necessary to dissociate the hydroxyl groups of the APGs. Thus, we used 0.1 M NaOH in the outlet vial to dissociate the APGs. The main problems associated with the combination of electrochemical detection and capillary electrophoresis are the need to isolate the detector from the electric field used in the capillary electrophoresis separation and the difficulty of aligning the working electrode with the end of the capillary. To overcome these problems, a simple capillary-electrode holder was constructed. This holder automatically aligns the capillary and the electrode in a wall-jet configuration without the aid of micropositioners and facilitates the replacement of electrodes and capillaries without reconstruction of the entire capillary/electrode setup. Special microcylindrical gold electrodes have been produced by sealing 300-microm-diameter gold wire into borosilicate-glass capillaries.