In the processing of thermoplastic composites, great importance is attributed to the consolidation step, as it can significantly reduce the porosity of the semi-finished product and thus influence considerably the quality of the final component. This work presents an approach to modeling the thermodynamic behavior of composite materials during hot-press consolidation. For this purpose a multi-region, multi-phase and multi-component-mixture model was developed using the simulation toolbox OpenFOAM®. The sensitivity of the model was tested by varying the thermal parameters and mesh resolution, confirming its robustness. Validity of the model was confirmed by comparing simulation results to experimental data for (i) polycarbonate with 44% carbon fiber by volume and (ii) polypropylene with 45.3% glass fiber by volume. The simulation allows very precise estimation of when a particular temperature, such as the glass transition temperature or melting point, will be reached at the core of a composite. In relation to the total process time, maximum deviation of the simulation from the experimental data amounted to 2.84%. Therefore, the model is well suited for process optimization, it offers a basis for further model implementations and the creation of a digital twin.

The aim of this work was to optimize spot welding of unidirectional tapes made of polycarbonate and carbon fibers. Three studies were performed to investigate the influences of various welding conditions on the quality of the welded spot. First, we used a full factorial experimental design to analyze the influence of temperature and time on the welds’ tensile stress at break. Second, we repeated the experiment with optimized settings and conditions. Finally, we adopted a central composite design (CCD) to investigate the stability of the process. Our results show that temperature had the greatest influence on weld quality. The maximum tensile stress achieved was 23 MPa. Using a relatively high temperature for a short welding time resulted in self-cleaning of the welding head and in a faster and more stable process, and gel permeation chromatography (GPC) confirmed that these conditions caused no additional degradation.