We study two types of water/alcohol-soluble aliphatic amines, polyethylenimine (PEI) and polyethylenimine-ethoxylated (PEIE), for their suitability as electron injection layers in solution-processed blue fluorescent organic light-emitting diodes (OLEDs). X-ray photoelectron spectroscopy is used to determine the nominal thickness of the polymer layers while ultraviolet photoelectron spectroscopy is carried out to determine the induced work-function change of the silver cathode. The determined work-function shifts are as high as 1.5 eV for PEI and 1.3 eV for PEIE. Furthermore, atomic force microscopy images reveal that homogeneous PEI and PEIE layers are present at nominal thicknesses of about 11 nm. Finally, we solution prepare blue emitting polymer-based OLEDs using PEI/PEIE in combination with Ag as cathode layers. Luminous efficiency reaches 3 and 2.2 cd A(-1), whereas maximum luminance values are as high as 8000 and 3000 cd m(-2) for PEI and PEIE injection layers, respectively. The prepared devices show a comparable performance to Ca/Ag OLEDs and an improved shelf lifetime.
The charge transport in organic solar cells is investigated by surface potential measurements via scanning Kelvin probe microscopy. Access to the solar cell's cross‐section is gained by milling holes with a focused ion beam which enables the direct scan along the charge transport path. In a study of poly(3‐hexylthiophene):1‐(3‐methoxycarbonyl)propyl‐1‐phenyl[6,6]C61 (P3HT:PCBM) bulk heterojunction solar cells, the open circuit voltage is built up at the top contact. A comparison of the potential distribution within normal and inverted solar cells under operation exhibits strongly different behaviors, which can be assigned to a difference in interface properties.
A novel Self‐assembled Monolayer (SAM) forming molecule bisjulolidyldisulfide (9,9'‐disulfanediylbis(2,3,6,7‐tetrahydro‐1H,5H‐pyrido[3,2,1‐ij]quinoline)) is demonstrated which lowers the work function of metal surfaces by ≈1.2 eV and can be deposited in a 1 min process. Bisjulolidyldisulfide exists in a stable disulfide configuration prior to surface exposure and can therefore be stored, handled, and processed in ambient conditions. SAM from bisjulolidyldisulfide are deposited on metal surfaces (Au and Ag), including inkjet printed Ag on polyethylene terephthalate substrates, investigated by photoelectron and infrared spectroscopy, and used as electrodes in n‐type organic field effect transistor (OFET). Treatment of electrodes in OFET devices with with bisjulolidyldisulfide‐SAMs reduces the contact resistance by two orders of magnitude and improves shelf life with respect to pristine metal electrodes. The presented treatment also increases the surfaces wettability and thereby facilitates solution processing of a subsequent layer. These beneficial properties for device performance, processing, and stability, combined with ease of preparation and handling, render this SAM‐forming molecule an excellent candidate for the high‐throughput production of flexible electronic devices.
We present a comparison of the potential distribution along the cross section of bilayer poly(3-hexylthiophene)/1-(3-methoxycarbonyl)propyl-1-phenyl[6,6]C61 (P3HT/PCBM) solar cells, which show normal and anomalous, S-shaped current-voltage (IV) characteristics. We expose the cross sections of the devices with a focussed ion beam and measure them with scanning Kelvin probe microscopy. We find that in the case of S-shaped IV-characteristics, there is a huge potential drop at the PCBM/Al top contact, which does not occur in solar cells with normal IV-characteristics. This behavior confirms the assumption that S-shaped curves are caused by hindered charge transport at interfaces.
Multilayer solution-processed devices in organic electronics show the tendency of intermixing of subsequently deposited layers. Here, we synthesize naphthalene tetracarboxydiimide (NDI)-based n-type semiconducting polymers with thermally cleavable side chains which upon removal render the polymer insoluble. Infrared and photoelectron spectroscopy were performed to investigate the pyrolysis process. Characterization of organic field-effect transistors provides insight into charge transport. After the pyrolysis homogeneous films could be produced which are insoluble in the primary solvent. By varying curing temperature and time we show that these process parameters govern the amount of side chains in the film and influence the device performance.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.