Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188),

Ground impact injuries are a significant mode of sports-related injuries and a particular concern for concussions caused by head-to-ground impacts. To study these injuries and develop improved technologies to reduce their likelihood and severity, a test surface must be available that replicates the dynamic mechanical response of typical playing field surfaces. In this study, a series of playing surface simulants created from stacked layers of foams and rubbers of various thicknesses and hardness values were tested under impact loading. Data are generated via ASTM F355/F1936 with a Type A cylindrical missile, implemented using a modified rail-guided test system. The results show that multi-layer stacks graded to transition from a soft impact face to a harder base layer, when subject to uniaxial impulse, produce acceleration pulse shapes, peak values, and durations comparable to a wide range of real playing surfaces. The low cost, repeatability, and facile assembly and maintenance of the playing surface simulants make them well-suited for laboratory study of ground impacts.

No abstract