No abstract

The stabilized space-time fluid-structure interaction (SSTFSI) technique developed by the Team for Advanced Flow Simulation and Modeling (T AFSM) was applied to a number of 3D examples, including arterial fluid mechanics and parachute aerodynamics. Here we focus on the interface projection techniques that were developed as supplementary methods targeting the computational challenges associated with the geometric complexities of the fluidstructure interface. Although these supplementary techniques were developed in conjunction with the SSTFSI method and in the context of air-fabric interactions, they can also be used in conjunction with other moving-mesh methods, such as the Arbitrary Lagrangian-Eulerian (ALE) method, and in the context of other classes of FSI applications. The supplementary techniques currently consist of using split nodal values for pressure at the edges of the fabric and incompatible meshes at the air-fabric interfaces, the FSI Geometric Smoothing Technique (FSI-GST), and the Homogenized Modeling of Geometric Porosity (HMGP). Using split nodal values for pressure at the edges and incompatible meshes at the interfaces stabilizes the structural response at the edges of the membrane used in modeling the fabric. With the FSI-GST, the fluid mechanics mesh is sheltered from the consequences of the geometric complexity of the structure. With the HMGP, we bypass the intractable complexities of the geometric porosity by approximating it with an "equivalent", locally-varying fabric porosity. As test cases demonstrating how the interface projection techniques work, we compute the air-fabric interactions of windsocks, sails and ringsail parachutes.

In this paper, we focus on fluid-structure interaction (FSI) modeling of ringsail parachutes, where the geometric complexity created by the "rings" and "sails" used in the construction of the parachute canopy poses a significant computational challenge. It is expected that NASA will be using a cluster of three ringsail parachutes, referred to as the "mains", during the terminal descent of the Orion space vehicle. Our FSI modeling of ringsail parachutes is based on the stabilized space-time FSI (SSTFSI) technique and the interface projection techniques that address the computational challenges posed by the geometric complexities of the fluid-structure interface. Two of these interface projection techniques are the FSI Geometric Smoothing Technique and the Homogenized Modeling of Geometric Porosity. We describe the details of how we use these two supplementary techniques in FSI modeling of ringsail parachutes. In the simulations we report here, we consider a single main parachute, carrying one third of the total weight of the space vehicle. We present results from FSI modeling of offloading, which includes as a special case dropping the heat shield, and drifting under the influence of side winds.

No abstract

No abstract