No abstract

Light-weight ceramic aerogels hold promise for superinsulation. However, its mechanical instability and complex manufacturing hampered its technical applications. In this study, we demonstrate lightweight pore-gradient ceramic aerogel-like foam monoliths (PGAFoams) through one-pot and in situ bubble supported pore gradient formation. The mechanically strong PGAFoams exhibit a low thermal conductivity of 0.036 W m–1 K–1 and a compressive strength of 89.85 MPa. The pore gradient and integral ceramic monolith nature provides such hydrophobic PGAFoams with thermal management, robust soundproof, and fire-resistance performance. Highly machinable PGAFoams can be adapted into a variety of shapes and dimensions to accommodate complex geometry applications. The scalable manufacturing of lightweight PGAFoams opens up building insulation with remarkable thermal management, high mechanical strength, low mass density, superior soundproofing, and fire-retardant performances.

To exploit the high-temperature superinsulation potential of anisotropic thermal management materials, the incorporation of ceramic aerogel into the aligned structural networks is indispensable. However, the long-standing obstacle to exploring ultralight superinsulation ceramic aerogels is the inaccessibility of its mechanical elasticity, stability, and anisotropic thermal insulation. In this study, we report a recoverable, flexible ceramic fiber-aerogel composite with anisotropic lamellar structure, where the interfacial cross-linking between ceramic fiber and aerogel is important in its superinsulation performance. The resulting ultralight aerogel composite exhibits a density of 0.05 g/cm3, large strain recovery (over 50%), and low thermal conductivity (0.0224 W m–1 K–1), while its hydrophobicity is achieved by in situ trichlorosilane coating with the water contact angle of 135°. The hygroscopic tests of such aerogel composites demonstrate a reversible thermal insulation. The mechanical elasticity and stability of the anisotropic composites, with its soundproof performance, shed light on the low-cost superelastic aerogel manufacturing with scalability for energy saving building applications.

No abstract

Notwithstanding the discreteness of metallic constrictions, it is shown that the finite elasticity of stable, single-atom gold constrictions allows for a continuous and reversible change in conductance, thereby enabling observation of channel saturation and conductance quantization.The observed channel saturation and signature for conductance quantization is achieved by superposition of atomic/subatomic-scale oscillations on a retracting/approaching gold tip against a gold substrate of a scanning probe. Results also show that conductance histograms are neither suitable for evaluating the stability of atomic configurations through peak positions or peak height nor appropriate for assessing conductance quantization. A large number of atomic configurations with similar conductance values give rise to peaks in the conductance histogram.The positions of the peaks and counts at each peak can be varied by changing the conditions under which the histograms are made. Histogram counts below 1 cannot necessarily be assumed to arise from single-atom constrictions.1