We report on a rapid method for reagentless identification and discrimination of single bacterial cells in aqueous solutions using a combination of laser tweezers and confocal Raman spectroscopy (LTRS). The optical trapping enables capturing of individual bacteria in aqueous solution in the focus of the laser beam and levitating the captured cell well off the cover plate, thus maximizing the excitation and collection of Raman scattering from the cell and minimizing the unwanted background from the cover plate and environment. Raman spectral patterns excited by a near-infrared laser beam provide intrinsic molecular information for reagentless analysis of the optically isolated bacterium. In our experiments, six species of bacteria were used to demonstrate the capability of the confocal LTRS in the identification and discrimination between the diverse bacterial species at various growth conditions. We show that synchronized bacterial cells can be well-discriminated among the six species using principal component analyses (PCA). Unsynchronized bacterial cells that are cultured at stationary phases can also be well-discriminated by the PCA, as well as by a hierarchical cluster analysis (HCA) of their Raman spectra. We also show that unsynchronized bacteria selected from random growth phases can be classified with the help of a generalized discriminant analysis (GDA). These findings demonstrate that the LTRS may find valuable applications in rapid sensing of microbial cells in diverse aqueous media.

No abstract

We report a method for fabricating fiber Bragg gratings (FBG) resistant to very severe environments mixing high radiation doses (up to 3 MGy) and high temperatures (up to 230°C). Such FBGs have been written in two types of radiation resistant optical fibers (pure-silica and fluorine-doped cores) by exposures to a 800 nm femtosecond IR laser at power exceeding 500 mW and then subjected to a thermal annealing treatment of 15 min at 750°C. Under radiation, our study reveals that the radiation induced Bragg wavelength shift (BWS) at a 3 MGy dose is strongly reduced compared to responses of FBGs written with nonoptimized conditions. The BWS remains lower than 10 pm for temperatures of irradiation ranging from 25°C to 230°C without noticeable decrease of the FBG peak amplitude. For an applicative point of view, this radiation induced BWS corresponds to an additional error on the temperature measurements lower than 1.5°C, opening the way to the development of radiation-tolerant multi-point temperature sensors for nuclear industry.

Vulnerability of Optical Frequency Domain Reflectometry (OFDR) based sensors to high γ-ray doses (up to 10 MGy) is evaluated with a specific issue of a radiation-hardened temperature and strain monitoring system for nuclear industry. For this, we characterize the main radiation effects that are expected to degrade the sensor performances in such applicative domain: the radiation-induced attenuation (RIA), the possible evolution with the dose of the Rayleigh scattering phenomenon as well as its dependence on temperature and strain. This preliminary investigation is done after the irradiation and for five different optical fiber types covering the range from radiation-hardened fibers to highly radiation sensitive ones. Our results show that at these high dose levels the scattering mechanism at the basis of the used technique for the monitoring is unaffected (changes below 5%), authorizing acceptable precision on the temperature or strain measurements. RIA has to be considered as it limits the sensing range. From our vulnerability study, the OFDR sensors appear as promising candidates for nuclear industry even at doses as high as 10 MGy.

International audienceWe investigate the response of Ge-doped, P-doped, pure-silica, or Fluorine-doped fibers to extreme environments combining doses up to MGy(SiO $_{{{2}}}$) level of 10 keV X-rays and temperatures between 25 C and 300 C . First, we evaluate their potential to serve either as parts of radiation tolerant optical or optoelectronic systems or at the opposite, for the most sensitive ones, as punctual or distributed dosimeters. Second, we improve our knowledge on combined ionizing radiations and temperature (R&T) effects on radiation-induced attenuation (RIA) by measuring the RIA spectra in the ultraviolet and visible domains varying the R&T conditions. Our results reveal the complex response of the tested fibers in such mixed environments. Increasing the temperature of irradiation increases or decreases the RIA values measured at 25C or sometimes has no impact at all. Furthermore, R&T effects are time dependent giving an impact of the temperature on RIA that evolves with the time of irradiation. The two observed transient and stationary regimes of temperature influence will make it very difficult to evaluate sensor vulnerability or the efficiency of hardening approaches without extensive test campaign