Tackifying resins (TR) are often added to pressure-sensitive adhesive films to increase the peel strength and adhesion energy. In waterborne adhesives, the TR is dispersed in water using surfactants and then blended with colloidal polymers in water (i.e. latex). In such waterborne systems, there are problems with the colloidal stability and the ease of coating (coatability) of the particle blends, and the films are often hydrophilic and subject to water uptake. Here, an alternative method of making waterborne, tackified adhesives is demonstrated. The TR is incorporated within the core of colloidal polymer particles via miniemulsion polymerisation. Atomic force microscopy combined with force spectroscopy analysis reveals there is heterogeneity in the distribution of the TR in films made from particle blends and also in films made from miniemulsion polymers. Two populations, corresponding to TR-rich and acrylic-rich components, were identified through analysis of the AFM force-

Nanocomposite films of ZrN-Ag were produced by reactive unbalanced magnetron sputtering, and their structural, chemical, mechanical, tribological, haemocompatibility, and antibacterial properties were studied as a function of film composition. The films formed a dense and homogeneous microstructure whereby nanocrystals of Ag are distributed evenly throughout the ZrN matrix. For small additions of silver, the hardness was found to increase, whereas the elastic modulus was found to decrease drastically. In the process of optimizing the deposition conditions, three kinds of coatings were prepared on 316 L surgical steel and tested by accelerated electrochemical polarization tests in order to detect the influence of Ag and the value of the bias potential on the corrosion performance of the system. Films produced under the optimum deposition conditions were, subsequently, deposited on medical grade Ti-Al-V and worn against ball-bearing steel using a ball-on-disk tribotester in bovine serum and were found to have superior tribological properties compared with single-phase ZrN coatings. The haemocompatibility of the films was assessed by investigating the adsorption of human serum albumin and fibrinogen on samples with different phase compositions. Quantification of the protein adsorption was carried out using spectroscopic ellipsometry, which confirmed the haemocompatibility of the films. Antibiotic activity of the films was quantified by incubating the films in bacterial cultures, namely, Staphylococcus epidermis, Staphylococcus aureus, and Escherichia coli. Films with a silver content > 10% exhibited superior antibacterial activity compared with the uncoated samples.