Nanostructured silicon is promising for high capacity anodes in lithium batteries. The specific capacity of silicon is an order of magnitude higher than that of conventional graphite anodes, but the large volume change of silicon during lithiation and delithiation and the resulting poor cyclability has prevented its commercial application. This challenge could potentially be overcome by silicon nanostructures that can provide facile strain relaxation to prevent electrode pulverization, maintain effective electrical contact, and have the additional benefits of short lithium diffusion distances and enhanced mass transport. In this review, we present an overview of rechargeable lithium batteries and the challenges and opportunities for silicon anodes, then survey the performance of various morphologies of nanostructured silicon (thin film, nanowires/nanotubes, nanoparticles, and mesoporous materials) and their nanocomposites. Other factors that affect the performance of nanostructured silicon anodes, including solvent composition, additives, binders, and substrates, are also examined. Finally, we summarize the key lessons from the successes so far and offer perspectives and future challenges to enable the applications of silicon nanoanodes in practical lithium batteries at large scale.

No abstract

No abstract

The Seebeck coefficient, electrical conductivity, and thermal conductivity of individual chromium disilicide nanowires were characterized using a suspended microdevice and correlated with the crystal structure and growth direction obtained by transmission electron microscopy on the same nanowires. The obtained thermoelectric figure of merit of the nanowires was comparable to the bulk values. We show that combined Seebeck coefficient and electrical conductivity measurements provide an effective approach to probing the Fermi Level, carrier concentration and mobility in nanowires.