Ceramic 3D printing based on stereolithography is an excellent alternative to overcome drawbacks of conventional subtractive manufacturing for 3D shape control. Optimization of photocurable ceramic slurry is one of the most essential conditions to achieve favorable 3D printed structures using SL. Homogeneity of ceramic particle dispersion in photocurable resin is particularly important to optimize ceramic suspension. Dispersant plays a significant role in increasing homogeneity. Dispersant in photocurable ceramic resin has an additional effect on photocurability and integrity of 3D printed green body. We herein discuss how dispersants influence 3D printing conditions based on stereolithography using various commercially available dispersants of BYK series such as BYK103, BYK111, BYK180, BYK182, and BYK2001. Both BYK111 and BYK180 showed better performances than others because of their lower volatilities under general temperature condition during a printing process. Both solubility and decomposition temperature of dispersants largely influenced the structural quality after washing and debinding processes. This study provides worthy information to design photocurable ceramic suspension for various types of ceramic materials.

Illite is a group of clay minerals that are expected to be widely used in catalyst fabrication, radioactive element adsorption, and so forth, due to its excellent adsorption properties. However, the shape control limitation of the illite product should be overcome to maximize its utilization and properties. We herein propose additive manufacturing (AM) as one of the best solutions to solve this structural drawback. Digital light processing (DLP) technology with the film‐type of the material supplying system was adapted instead of the general vat‐type DLP system to increase illite printability. The photo‐curability and printability of illite‐contained photocurable suspension were optimized. The color effect due to different ferric oxide content in yellow‐ and white‐illite which influence the photopolymerization process also adjusted thoroughly. White illite showed better photo‐curability and could be increased solid loading than yellow illite. The defect‐free illite products with three‐dimensional complex structures, which cannot be produced by typical ceramic processes, were obtained by DLP technology for both yellow‐ and white‐illite after sintering at 1100°C. The overcoming of shape control limitation of illites by ceramic AM proved in this study has excellent potential for expanding illite utilities in various applications.

No abstract