This paper describes the application of lock-in thermography (LIT) for flip-chip package-level failure analysis. LIT successfully detected and localized short failures related to both die/C4 bumps and package defects inside the organic substrate. The detail sample preparation to create short defects at different layers, LIT fault isolation methodology, and case studies performed with LIT are also presented in this paper.

This article provides a high-level review of the tools and techniques used for backside analysis. It discusses the use of laser scanning and conventional microscopy, liquid and solid immersion lenses, photon emission microscopy (PEM), and laser-based fault isolation methods with emphasis on light-induced voltage alteration (LIVA). It explains how laser voltage probing is used for backside waveform acquisition and describes backside sample preparation and deprocessing techniques including parallel polishing and milling, laser chemical etching, and FIB circuit edit and modification.

Modifications directly to a transistor’s source/drain and polysilicon gate through the backside of a SOI device were made. Contact resistance data was obtained by creating contacts through the buried oxide layer of a manufactured test structure. A ring oscillator circuit was modified and the shift in oscillator frequency was measured. Finally, cross section images of the FIB created contacts were presented in the paper to illustrate the entire process.