Dredged sediment from Milwaukee Harbor showed two primary classes of particles in the <2 mm size range: a lighter-density coal- and wood-derived fraction with 62% of total PAHs and a heavier-density sand, silt, and clay fraction containing the remaining 38% of the PAHs. Room-temperature PAH desorption kinetic studies on separated sediment fractions revealed slow desorption rates for the coal-derived particles and fast desorption rates for the clay/silt particles. The effect of temperature on PAH release was measured by thermal program desorption mass spectrometry to investigate the desorption activation energies for PAHs on the different sediment particles. Three activated diffusion-based models and an activated first-order rate model were used to describe the thermal desorption of PAHs for four molecular weight classes. PAH binding with the coal-derived particles was associated with high activation energies, typically in the range of 115-139 kJ/mol. PAHs bound to the clay/silt material had much lower activation energy, i.e., in the range of 37-41 kJ/ mol for molecular weight 202. Among the desorption models tested, a spherical diffusion model with PAHs located like a rind on the outer 1-3 microm region best described the PAH thermal desorption response for coal-derived particles. This internal PAH distribution pattern on coalderived particles is based on prior direct measurement of PAH locations at the subparticle scale. These studies reveal that heterogeneous particle types in sediment exhibit much different amounts and binding of PAHs. PAHs associated with coal-derived particles aged over several decades in the field appear to be far from reaching an equilibrium sorption state due to the extremely slow diffusivities through the polymer-like coal matrix. These results provide an improved mechanistic perspective for the understanding of PAH mobility and bioavailability in sediments.

Brominated disinfection byproducts (DBPs), formed from the reaction of disinfectant(s) with natural organic matter and bromide in raw water, are generally more cytotoxic and genotoxic than their chlorinated analogues. Brominated DBPs have been intensively studied over the past 35 years, yet only a fraction of the total organic bromine formed during disinfection has been identified. A significant portion of the unaccounted total organic bromine may be attributed to polar/highly polar brominated DBPs. In this work, a method for fast selective detection of polar/ highly polar brominated DBPs in drinking water was developed using negative ion electrospray ionization-triple quadrupole mass spectrometry (ESI-tqMS) by setting precursor ion scans of m/z 79 and 81. This method was conducted without liquid chromatography separation. The results demonstrate that the ESI-tqMS precursor ion scan is an effective tool for the selective detection of electrospray ionizable bromine-containing compounds in a complex mixture. Many polar/ highly polar bromine-containing DBPs were tentatively found in two drinking water samples, and some of them may be new brominated DBPs that have not been previously reported. This method was also extended for the selective detection of polar bromine-containing compounds/contaminants in groundwater, surface water and wastewater.