No abstract

The phenomenon of low-pressure adsorption/desorption hysteresis, which is commonly observed in microporous polymers, is investigated by detailed gas adsorption studies. Diffusional limitations by pore blocking effects, which arise as a consequence of the micropore morphology and connectivity, are discussed as the origin of the hysteresis rather than swelling effects, which have been suggested previously. Micropores with narrow openings, which cannot be filled easily, are expected to be present next to open pores. Those pores are termed restricted-access pores and are only filled in the course of the adsorption process as a consequence of the increasing solvation pressure exhibited from already filled micropores. As a consequence of the results presented here, it is suggested to use the desorption branch in addition to the adsorption branch for the extraction of the porosity characteristics, such as specific surface area, pore volume, and pore size distribution. The magnitude of the low-pressure hysteresis might hence give an idea of the micropore connectivity, which is important information for potential applications.

Betulin, an abundant triterpene, can be extracted from birch bark and can be used as a renewable monomer in the synthesis of microporous polyesters. Cross-linked networks and hyperbranched polymers are accessible by an A(2) + B(3) reaction, with betulin being the A(2) monomer and B(3) being a trifunctional acid chloride. Reaction of betulin with a diacid dichloride results in linear, soluble polyesters. The present communication proves that the polyreaction follows the classic schemes of polycondensation reactions. The resulting polymers are analyzed with regard to their micro-porosity by gas sorption, NMR spectroscopy, and X-ray scattering methods. The polymers feature intrinsic microporosity, having ultrasmall pores, which makes them candidates for gas separation membranes, e.g., for the separation of CO(2) from N(2) .

Bioconjugate amphiphiles comprising triterpene and poly(ethylene oxide) (PEO) were studied according to their thermoresponsive aggregation behavior (LCST) in water. Cholesteryl-PEO (CE) and betulinyl-PEO (BE) comprising <70 wt% PEO precipitated from water upon heating. CE, but not BE, solutions contained nanoscopic aggregates at room temperature causing different thermoprecipitation behaviors. Solutions containing 5 wt% solutions of BE with short PEO chains demonstrated dual thermoresponsive behavior, precipitating at high temperature and forming hydrogel at low temperature. A BE multiblock copolymer was found to form large aggregates, presumably vesicles, in water. Results suggest that the solution properties of triterpene-PEO amphiphiles can be controlled by the chemical composition and structure.