No abstract

The precise control of the structure and related properties becomes crucial for sophisticated applications of thin films deposited by magnetron sputtering in emerging industries including the flat panel display, digital electronics and nano- and bio-industries. The film structure is closely related to the total energy delivered to the substrate surface for nucleation and growth during all kinds of thin film processes, including magnetron sputtering. Therefore, the energy delivered to the surface for nucleation and growth during magnetron sputtering should be measured and analysed by integrated diagnostics of the plasma parameters which are closely associated with the process parameters and other external process conditions. This paper reviews the background of thin film nucleation and growth, the status of magnetron sputtering technology and the progress of plasma diagnostics for plasma processing. The evolution of the microstructure during magnetron sputtering is then discussed with respect to the change in the process variables in terms of the plasma parameters along with empirical data of the integrated plasma diagnostics for various magnetron sputtering conditions with conventional dc, pulsed dc and high power pulsed dc sputtering modes. Among the major energy terms to be discussed are the temperature change in the top surface region and the energies of ions and neutral species.

Transparent stretchable (TS) sensors capable of detecting and distinguishing touch and pressure inputs are a promising development in wearable electronics. However, realization of such a device has been limited by difficulties in achieving optical transparency, stretchability, high sensitivity, stability, and distinguishable responsivity to two stimuli simultaneously. Herein, we report a TS sensor in which touch and pressure stimuli can be detected and distinguished on a substrate with a stress-relieving three-dimensional (3D) microstructured pattern providing multidirectional stretchability and increased pressure sensitivity. The TS capacitive device structure is a dielectric layer sandwiched between an upper piezoresistive electrode of a poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)/ionic liquid composite, which enables touch and pressure stimuli to be distinguished, and a lower electrode of metal/indium tin oxide/metal multilayer. The TS sensor array was demonstrated as a wearable input device for controlling a small vehicle. The TS touch-pressure sensor has great potential to be used as a multimodal input device for future wearable electronics.

This work reports investigation of the Al-doped ZnO (AZO) film deposition process, at different working pressures, in a conventional magnetron sputtering system. The primary goal of this study is to investigate the plasma formation and deposition process using various diagnostic tools, by utilizing low-temperature deposition process. In addition, this paper also presents a systematic Langmuir probe (LP) analysis procedure to determine the maximum information about plasma parameters. For the present study, we have extensively used LP method to characterize the deposition process for the control of plasma parameters. Along with the LP method, we have also used optical emission spectroscopy diagnostic to examine the favorable deposition condition for the fabrication of conductive AZO film. Utilizing diagnostics, this also reports measurements of ion current density, substrate temperature, and deposition rates to fabricate low resistivity films of ∼3 mΩ cm.

This work presents a systematic plasma diagnostic approach for plasma processing using radio frequency (RF) and RF/UHF (ultra high frequency) hybrid plasmas. The present work also studies the influence of frequency on the deposition of Hydrogenated silicon nitride (SiNx: H) film using N2/SiH4/NH3 discharges. Analysis of data reveals that the UHF power addition to RF is quite effective in the plasma and radicals formation in different operating conditions. For the diagnostics, we have used optical emission spectroscopy, vacuum ultraviolet absorption spectroscopy, and RF compensated Langmuir probe. The presented diagnostic method directly exploits the optimized condition for fabricating high-quality silicon rich nitride (SiNx: H) thin film, at low temperature. With the help of hybrid plasmas, it is possible to fabricate SiNx: H film with high transparency ∼90%.