The need to transit to greener options in soil stabilisation has revamped research on the use of industrial and agricultural by-products in order to cut down on the current carbon footprint from the use of ordinary Portland cement (OPC) and lime related binders for the treatment of problematic soils. This study is a review on the use of geopolymers constituted by alkali activation of several industrial wastes such as pulverised fuel ash (PFA), ground granulated blast furnace slag (GGBS), metakaolin (MK), glass powder (GP), palm oil fuel ash (POFA), silica fume (SF), rice husk ash (RHA), volcanic ash (VA), and marble powder (MP) for the stabilisation of weak clays. The performance of stabilised clays as subgrade and subbase materials for road pavement construction was evaluated by comparing the 7 day UCS of the treated clays with the strength requirement for stabilised materials as outlined in BS EN 16907-4. The result of the study shows that geopolymers can be employed in improving the engineering properties of problematic clays to meet practical applications. Strength improvement was observed in the stabilised clays with increased precursor content, molarity of alkaline activator, and curing period.

This study presents a literature review on the use of artificial neural networks in the prediction of geo-mechanical properties of stabilised clays. In this paper, the application of ANNs in a geotechnical analysis of clay stabilised with cement, lime, geopolymers and by-product cementitious materials has been evaluated. The chemical treatment of expansive clays will involve the development of optimum binder mix proportions or the improvement of a specific soil property using additives. These procedures often generate large data requiring regression analysis in order to correlate experimental data and model the performance of the soil in the field. These analyses involve large datasets and tedious mathematical procedures to correlate the variables and develop required models using traditional regression analysis. The findings from this study show that ANNs are becoming well known in dealing with the problem of mathematical modelling involving nonlinear functions due to their robust data analysis and correlation capabilities and have been successfully applied to the stabilisation of clays with high performance. The study also shows that the supervised ANN model is well adapted to dealing with stabilisation of clays with high performance as indicated by high R2 and low MAE, RMSE and MSE values. The Levenberg–Marquardt algorithm is effective in shortening the convergence time during model training.

Gypseous soils are capable of presenting ground construction challenges to civil and geotechnical engineers due to their unpredictable deformation characteristics. These undesirable responses are sometimes caused by environmental changes in moisture content due to temperature variations, fluctuation of underground water table, surface water, and gypsum content. Hence, the adoption of effective and economical means of stabilising gypseous soils is imperative. This study’s focus is on the early age strength and microstructural characteristics of gypseous soils treated with lime and GGBS. Treated and untreated gypseous soils with 5%, 15%, and 25% gypsum content were subjected to wet–dry cycles while investigating unconfined compressive strength (UCS), water absorption, pH, microstructural changes, and swell. The analysis of the results shows that at zero cycle, the UCS of the untreated gypseous soils increases from 0.62 to 0.79 MPa and swell decreases from 69 to 23%, respectively, as gypsum content increases. However, upon subjection to wet–dry cycles, the UCS reduced from 0.16 to 0.08 MPa at the end of the sixth cycle due to dissolution of gypsum within the soil pores which reduced the strength. The result also shows that gypsum content increases water absorption and reduces the pH of the untreated gypseous soils because of the neutral pH of gypsum. Furthermore, lime-GGBS-treated gypseous soils maintained a higher pH after six wet–dry cycles compared to untreated gypseous soils due to the high pH of lime and the increase in calcium content which improved bonding. In addition, microstructural analysis using SEM indicated early age precipitation of cementitious compounds (CSH) for increasing strength of lime-GGBS-treated gypseous soils compared to untreated gypseous soils.

In this experimental study, the physico-mechanical and microstructural properties of sulphate-bearing clays have been investigated. Sulphate bearing soils constituted by mixing kaolin and gypsum at 0%, 15%, 25%, and 35% gypsum contents were treated with 12% ordinary Portland cement (OPC) and 4%Lime (L) and 8% ground granulated blast furnace slag (GGBS) and subjected to compaction, swell, unconfined compressive strength (UCS), California bearing ratio (CBR), and scanning electron microscopy (SEM) and energy dispersive spectrometry (EDX) analyses. The results of the study showed that the use of L-GGBS improved the soaked CBRs of the treated samples by over 43% when compared to OPC-treated samples after 7-days curing. A reduction in water absorption by 82% was also observed with L-GGBS treatment after 28-days curing. The UCS results also showed better performance with L-GGBS treatment exceeding 856% at 28 days. The effect of increased cementitious product with increasing gypsum content was negated by simultaneous and rapid growth of ettringite minerals which reduced the strength and increased swelling of OPC treated samples up to 18.92%, exceeding allowable limits of 2.5% as specified in Highway Agency Advice Note HA 74/07. The L-GGBS treated gypseous soil samples meet the strength requirement for stabilised sub-base (CS) and stabilised road-bases (CB1 and CB2) as described in TRL ORN31. Hence, the use of L-GGBS combination was found to be effective in ameliorating sulphate-induced expansion and therefore encouraged in the stabilisation of subgrade and road-base materials with high sulphate contents.

This work presents an experimental study on the physico-mechanical and microstructural characteristics of stabilised soils and the effect of wetting and drying cycles on their durability as road subgrade materials. The durability of expansive road subgrade with a high plasticity index treated with different ratios of ground granulated blast furnace slag (GGBS) and brick dust waste (BDW) was investigated. Treated and cured samples of the expansive subgrade were subjected to wetting–drying cycles, California bearing ratio (CBR) tests, and microstructural analysis. The results show a gradual reduction in the California bearing ratio (CBR), mass, and the resilient modulus of samples for all subgrade types as the number of cycles increases. The treated subgrades containing 23.5% GGBS recorded the highest CBR value of 230% under dry conditions while the lowest CBR value of 15% (wetting cycle) was recorded for the subgrade treated with 11.75% GGBS and 11.75% BDW at the end of the wetting–drying cycles, both of which find useful application in road pavement construction as calcium silicate hydrate (CSH) gel was formed in all stabilised subgrade materials. However, the increase in alumina and silica content upon the inclusion of BDW initiated the formation of more cementitious products due to the increased availability of Si and Al species as indicated by EDX analysis. This study concluded that subgrade materials treated with a combination of GGBS and BDW are durable, sustainable and suitable for use in road construction.