Volt/var control (VVC) of smart PV inverter is becoming one of the most popular solutions to address the voltage challenges associated with high PV penetration. This work focuses on the local droop VVC recommended by the grid integration standards IEEE1547, rule21 and addresses their major challenges i.e. appropriate parameters selection under changing conditions, and the control being vulnerable to instability (or voltage oscillations) and significant steady state error (SSE). This is achieved by proposing a two-layer local real-time adaptive VVC that has two major features i.e. a) it is able to ensure both low SSE and control stability simultaneously without compromising either; and b) it dynamically adapts its parameters to ensure good performance in a wide range of external disturbances such as sudden cloud cover, cloud intermittency, and substation voltage changes. A theoretical analysis and convergence proof of the proposed control is also discussed. The proposed control is implementation friendly as it fits well within the integration standard framework and depends only on the local bus information. The performance is compared with the existing droop VVC methods in several scenarios on a large unbalanced 3-phase feeder with detailed secondary side modeling.

Electric distribution systems around the world are seeing an increasing number of utility-owned and non-utility-owned (customer-owned) intelligent devices and systems being deployed. New deployments of utility-owned assets include self-healing systems, microgrids, and distribution automation. Non-utilityowned assets include solar photovoltaic generation, behind-the-meter energy storage systems, and electric vehicles. While these deployments provide potential data and control points, the existing centralized control architectures do not have the flexibility or the scalability to integrate the increasing number or variety of devices. The communication bandwidth, latency, and the scalability of a centralized control architecture limit the ability of these new devices and systems from being engaged as active resources. This paper presents a standards-based architecture for the distributed power system controls, which increases operational flexibility by coordinating centralized and distributed control systems. The system actively engages utility and non-utility assets using a distributed architecture to increase reliability during normal operations and resiliency during extreme events. Results from laboratory testing and preliminary field implementations, as well as the details of an ongoing full-scale implementation at Duke Energy, are presented. INDEX TERMS Distributed control, microgrids, power distribution, power system protection, smart grids.

Abstract-The most formidable challenge in assembling a Smart Grid is the integration of a high penetration of renewables. Demand Response, a largely promising concept, is increasingly discussed as a means to cope with the intermittent and uncertain renewables. In this paper, we propose a dynamic market mechanism that reaches the market equilibrium through continuous negotiations between key market players. In addition to incorporating renewables, this market mechanism also incorporates a quantitative taxonomy of demand response devices, based on the inherent magnitude, run-time, and integral constraints of demands. The dynamic market mechanism is evaluated on an IEEE 118 Bus system, a high fidelity simulation model of the Midwestern United States power grid. The results show how the proposed mechanism can be utilized to determine combinations of demand response devices in the presence of intermittent and uncertain renewables with varying levels of penetration so as to result in a desired level of Social Welfare.

No abstract

This paper presents current research on Danish municipalities' use of Energy Service Companies (ESCO) as a way to improve the standard of public buildings and to increase energy efficiency. In recent years more and more municipalities have used ESCO-contracts to retrofit existing public buildings, and to make them more energy efficient. At the moment 30 municipalities (of the 98 municipalities in Denmark) are involved in, or preparing, ESCO contracts. Nevertheless, ESCO-contracting still faces many challenges on the Danish market, as there is a widespread skepticism towards the concept amongst many stakeholders. The purpose of this paper is to discuss the various experience gained so far by municipalities use of ESCO-contracting, the different approached to ESCO-contracting being used in practice, as well as the different viewpoints drivers and barriers behind the development. The strong growth in ESCO-contracts reflects that the ESCO-concept fits well with a number of present problems that municipalities are facing, as well as a flexible adaptation to the local context in different municipalities.