S355 structural steel is commonly used in fabrication of offshore structures including offshore wind turbine monopiles. Knowledge of mechanical and fracture properties in S355 weldments and the level of scatter in these properties is extremely important for ensuring the integrity of such structures through engineering critical assessment. An interlaboratory test programme was created to characterise the mechanical and fracture properties of S355 weldments, including the base metal, heat‐affected zone, and the weld metal, extensively. Charpy impact tests, chemical composition analysis, hardness tests, tensile tests, and fracture toughness tests have been performed on specimens extracted from each of the 3 material microstructures. The experimental test results from this project are presented in this paper, and their importance in structural integrity assessment of offshore wind turbine monopiles has been discussed. The results have shown a decreasing trend in the Charpy impact energy and Jmax values with an increase in yield stress from base metal to heat‐affected zone to weld metal. Moreover, the JIC fracture toughness value in the heat‐affected zone and weld metal is on average around 60% above and 40% below the base metal value, respectively. In addition, the average Charpy impact energy value in the heat‐affected zone and weld metal is around 5% and 30% below the base metal value, respectively. The effects of mechanical and fracture properties on the critical crack size estimates have been investigated, and the results are discussed concerning the impact of material properties on structural design and integrity assessment of monopiles.

Floating offshore wind turbines are becoming more attractive to the wind industry due to their capability to operate larger turbines in deeper waters. The floating support structures are anchored to the seabed via mooring chains to impede the structure's unwanted movements. The combination of cyclic stresses and the corrosive marine environment makes the floating support structures vulnerable to corrosion pitting and subsequently fatigue crack initiation and propagation. In this study a framework is proposed to simulate fatigue crack growth from multiple corrosion pits at critical spots of the Spar-type floating support structures to examine the status of the crack during several years of operation. The proposed advanced fracture mechanics based approach provides a methodology to assess the integrity of the structure and subsequently plan for preventive or curative maintenance. The crack growth rate is examined for both singular and multiple cracks at different R ratios and for different stress levels using ABAQUS XFEM. Following numerical simulations, a sensitivity analysis is carried out using Crackwise software for different values of plate thickness, R ratio and initial crack size. The numerical results are discussed in terms of the corrosion pitting effects on fatigue life assessment of floating offshore wind turbines.

No abstract

No abstract