A stretchable transparent double network ionogel composed of physically cross-linked poly(vinylidene fluoride-co-hexafluoropropylene) (P(VDFco-HFP)) and chemically cross-linked poly(methyl methacrylate-co-butylmethacrylate) (P(MMA-co-BMA)) elastomer networks within [EMIM][TFSI] ionic liquid was fabricated through a facile one-pot thermal polymerization. The dualnetwork (DN) ionogel presents good mechanical performance (failure tensile stress 2.31 MPa, strain 307%) with a high loading of ionic liquid (70 wt %) for achieving required ionic conductivity (>0.1 S/m at room temperature). The transparent chemical cross-linked P(MMA-co-BMA) elastomer network endows high transparency (>93%) and high stretchability to the DN ionogel. The DN ionogel maintains good toughness, elasticity, and transparency in a wide temperature range (−40 to 80 °C) for the application in a harsh environment. In addition, the sensitivity of the DN ionogel to the change of environment temperature and deformation was detected and described. The practical potential of the DN ionogel in flexible electronic devices is further revealed by fabricating DN ionogel strain sensors to detect the movement of different human limbs including the bending of the finger, wrist, and elbow as well as the slight throat jitter during the swallowing and vocalization, showing fast response, high sensitivity, and good repeatability.

As a new two-dimensional material similar to graphene, MXene has attracted extensive attention in the field of electrochemical materials such as supercapacitors because of its excellent mechanical properties, electrical conductivity, and thermal conductivity. What is better than graphene is that the few-layer MXene material obtained by proper treatment has good water dispersibility and can be used as an ideal nanomaterial to enhance the conductivity of hydrogels. However, the articles about the few-layer MXene material used in the preparation of composite hydrogels are rare. In this paper, MXene was synthesized by Yury mild method. Poly­(N-isopropyl acrylamide) (PNIPAM) hydrogel and physical cross-linking hydrogel were used as the matrix to prepare composite hydrogels with temperature sensitivity and stress-sensing properties. The composite hydrogels exhibited excellent mechanical properties: it could be stretched to over 14 times the original length and achieved a 0.4 MPa tensile strength while showing good self-healing ability, which was of great significance for the practical application of hydrogels. The conductivity of the composite hydrogel was 1.092 S/m, which was about 15 times that of the control hydrogel without MXene. The potential of the composite hydrogel as a smart compression sensor was also verified by the conductivity tests.

No abstract

No abstract

Silicon-containing block copolymer thin films with high interaction parameter and etch contrast are ideal candidates to generate robust nanotemplates for advanced nanofabrication, but they typically form in-plane oriented microdomains as a result of the dissimilar surface energies of the blocks. Here, we describe a two-step annealing method to produce vertically aligned lamellar structures in thin film of a silicon-containing rod–coil thermotropic liquid crystalline block copolymer. The rod–coil block copolymer with the volume fraction of the Si-containing block of 0.22 presents an asymmetrical lamellar structure in which the rod block forms a hexatic columnar nematic liquid crystalline phase. A solvent vapor annealing step first produces well-ordered in-plane cylinders of the Si-containing block, then a subsequent thermal annealing promotes the phase transition from in-plane cylinders to vertical lamellae. The pathways of the order–order transition were examined by microscopy and in situ using grazing incidence small-angle X-ray scattering and wide-angle X-ray scattering.