With the current development of modern electronics toward miniaturization, high-degree integration and multifunctionalization, considerable heat is accumulated, which results in the thermal failure or even explosion of modern electronics. The thermal conductivity of materials has thus attracted much attention in modern electronics. Although polymer composites with enhanced thermal conductivity are expected to address this issue, achieving higher thermal conductivity (above 10 W m K) at filler loadings below 50.0 wt % remains challenging. Here, we report a nanocomposite consisting of boron nitride nanotubes and cellulose nanofibers that exhibits high thermal conductivity (21.39 W m K) at 25.0 wt % boron nitride nanotubes. Such high thermal conductivity is attributed to the high intrinsic thermal conductivity of boron nitride nanotubes and cellulose nanofibers, the one-dimensional structure of boron nitride nanotubes, and the reduced interfacial thermal resistance due to the strong interaction between the boron nitride nanotubes and cellulose nanofibers. Using the as-prepared nanocomposite as a flexible printed circuit board, we demonstrate its potential usefulness in electronic device-cooling applications. This thermally conductive nanocomposite has promising applications in thermal interface materials, printed circuit boards or organic substrates in electronics and could supplement conventional polymer-based materials.

In this work, we report a fabrication of epoxy resin/ordered three-dimensional boron nitride (3D-BN) network composites through combination of ice-templating self-assembly and infiltration methods. The polymer composites possess much higher thermal conductivity up to 4.42 W m K at relatively low loading 34 vol % than that of random distribution composites (1.81 W m K for epoxy/random 3D-BN composites, 1.16 W m K for epoxy/random BN composites) and exhibit a high glass transition temperature (178.9-229.2 °C) and dimensional stability (22.7 ppm/K). We attribute the increased thermal conductivity to the unique oriented 3D-BN thermally conducive network, in which the much higher thermal conductivity along the in-plane direction of BN microplatelets is most useful. This study paves the way for thermally conductive polymer composites used as thermal interface materials for next-generation electronic packaging and 3D integration circuits.