No abstract

No abstract

No abstract

The microstructural evolution of AZ61 magnesium alloy during hot compression at various temperatures was investigated. The experimental results show that dynamic recrystallisation occurs over a wide temperature range. Grains can be greatly refined through dynamic recrystallisation. The mean size of the recrystallised grains increases with a decrease of temperature or value of Z (Zener -Hollomon parameter), while the reciprocal of the recrystallised grain size has a good linear relationship with the natural logarithm of the Z value, as well as the hyperbolic term of the flow stress. Basal and non-basal segments have been found in both recrystallised grains and primary grains, whereas dislocation pileups exist only in recrystallised grains when the temperature is lower than 673 K. The occurrence of twins is dependent on temperature and strain. When the strain increases, primary twins evolve into secondary twins. However, secondary twins grow with an increase of temperature; some secondary twins evolve into subgrains.MST/6033

Aluminum single crystal with 99.999% purity was deformed at room temperature by equal channel angular pressing (ECAP) up to 16 passes. Grain size and misorientation of processed samples were quantitatively characterized by TEM and EBSD. The results show that the refinement efficiency of high purity aluminum single crystal was poor in the initial stage. Extrusion by fewer ECAP passes (n ≤ 8) resulted in only elongated grains containing a large number of subgrains and small misorientations between grains. Stable microstructures of nearly equiaxed grains with high misorientations were obtained by 15 passages, indicating that the initial extremely coarse grains and highly uniform grain orientation are not conducive to the accumulation of strain energy. The initial state of high purity aluminum has a significant effect on the refining efficiency of the ECAP process.