Optical spin-Hall effect (OSHE) is a spindependent transportation phenomenon of light as an analogy to its counterpart in condensed matter physics. Although being predicted and observed for decades, this effect has recently attracted enormous interests due to the development of metamaterials and metasurfaces, which can provide us tailor-made control of the light-matter interaction and spin-orbit interaction. In parallel to the developments of OSHE, metasurface gives us opportunities to manipulate OSHE in achieving a stronger response, a higher efficiency, a higher resolution, or more degrees of freedom in controlling the wave front. Here, we give an overview of the OSHE based on metasurface-enabled geometric phases in different kinds of configurational spaces and their applications on spin-dependent beam steering, focusing, holograms, structured light generation, and detection. These developments mark the beginning of a new era of spin-enabled optics for future optical components.

No abstract

To reduce the temperature of asphalt pavement and improve the antirutting performance of asphalt mixture, a thermal-resistant asphalt mixture (TRAM) was produced, in which a certain proportion of mineral aggregate was replaced by ceramic (CE) or floating beads (FB) featuring low thermal conductivity. Firstly, a parallel plate test was developed to test the thermal conductivity of asphalt mixture added with different thermal-resistant materials. Secondly, the illumination test system was designed to study the visual cooling effect of different TRAM by imitating the natural environment. Finally, the effect of different thermal-resistant materials on asphalt pavement performance was evaluated. The results show that the addition of thermal-resistant materials can reduce the thermal conductivity and the temperature of asphalt mixture. The cooling effect of CE75 and CE100 (coarse aggregate substituted by 75% and 100% CE, respectively) is superior to other aggregates. The temperature reduction rates of CE75 and CE100 reache 6.6°C and 6.8°C, respectively. For FB50 and FB75 (fine aggregate substituted with 50 and 75% FB, respectively), the cooling effect of them reaches 3.9°C and 4.5°C, respectively. In addition, the CE and FB can improve the antirutting performance of asphalt mixture by reducing the temperature inside the pavement. The high-temperature performance of CE75 and FB75 is the best. With the increase of thermal resistance materials, the low-temperature cracking resistance of asphalt mixture decreases gradually. The failure strain of mixture added with 100% thermal resistance materials is close to the lower limit of Chinese specification. The water stability of different TRAM changes with various test methods. Taking into account the results of pavement performance and the cooling effect, the substitution proportion of CE and FB for TRAM is proposed as 50%∼75%, respectively.

No abstract

We present the first design and analysis of a solid-state Mamyshev oscillator. We utilize the phase-mismatched cascaded quadratic nonlinear process in periodically poled lithium niobite waveguide to generate substantial spectral broadening for Mamyshev modelocking. The extensive spectral broadening bridges the two narrowband gain media in the two arms of the same cavity, leading to a broadband mode-locking not attainable with either gain medium alone. Two pulses are coupled out of the cavity and each of the output pulses carries a pulse energy of 25.3 nJ at a repetition rate of 100 MHz. The 10-dB bandwidth of 2.1 THz supports a transform limited pulse duration of 322 fs, more than 5 times shorter than what can be achieved with either gain medium alone. Finally, effects of group velocity mismatch, group velocity dispersion, and nonlinear saturation on the performance of Mamyshev mode-locking are numerically discussed in detail.