No abstract

Ultra-short laser filamentation has been intensively studied due to its unique optical properties for applications in the field of remote sensing and detection. Although significant progress has been made, the quality of the laser beam still suffers from various optical aberrations during long-range transmission. Astigmatism is a typical off-axis aberration that is often encountered in the off-axis optical systems. An effective method needs to be proposed to suppress the astigmatism of the beam during filamentation. Herein, we numerically investigated the impact of the nonlinear effects on the focusing properties of the astigmatic Gaussian beams in air and obtained similar results in the experiment. As the single pulse energy increases, the maximum on-axis intensity gradually shifted from the sagittal focus to the tangential focus and the foci moved forward simultaneously. Moreover, the astigmatism could be suppressed effectively with the enhancement of the nonlinear effects, that is, the astigmatic difference and the degree of beam distortion were both reduced. Through this approach, the acoustic intensity of the filament (located at the tangential focal point) increased by a factor of 22.8. Our work paves a solid step toward the practical applications of the astigmatism beam as the nonlinear lidar.

An optimized remote material detection scheme based on the laser filament-induced plasma spectroscopy and light detection and ranging (FIPS-LIDAR) is proposed in this work. The elemental composition and concentration of aerosol are measured by FIPS-LIDAR. By focusing the femtosecond laser with a large aperture (Φ41 cm) concave mirror and coaxial fluorescence collection scheme, the remote detection of aerosol in air at μg/m3 level has been realized at a distance of 30 m. The limit of detection for Na+ in aerosol droplets is 8 ppm (3 μg/m3 in air), which is the lowest detection limit that has been reported using millijoule femtosecond laser pulse (4.4 mJ). Furthermore, using spectral preprocessing and optimization of the proposed significance of peak (SOP) algorithm, feature peak signals are extracted from weak signals and the limit of detection can be further decreased to 1.4 μg/m3.

No abstract

The filamentation process under atmospheric turbulence is critical to its remote-sensing application. The effects of turbulence intensity and location on the spatial distribution of femtosecond laser filaments in the air were studied. The experimental results show that the nonlinear effect of the filament can restrain the beam wander. When the turbulence intensity was 3.31×10−13 cm−2/3, the mean deviation of the wander of the filament center was only 27% of that of the linear transmitted beam. The change in turbulence location would lead to a change in the standard deviation of the beam centroid drift. Results also show that the filament length would be shortened, and that the filament would end up earlier in a turbulent environment. Since the filamentation-based LIDAR has been highly expected as an evolution multitrace pollutant remote-sensing technique, the study promotes our understanding of how turbulence influences filamentation and advances atmospheric remote sensing by applying a filament.