No abstract

This paper takes Harbin city as an example, on remote sensing data of 2004, 2006, 2007, and 2010, reflect city land surface temperature. Through the distance calculation, the heat island intensity distribution map in Harbin city was different in different seasons, and then analyzes Harbin urban heat island effect characteristics to explore the distribution and variation.

The paper studies integrated protection methods of pre-Qing architectural heritage area in Liaoning with Geographic Information System (GIS) technology. First of all, pre-Qing architectural heritage in Liaoning is investigated, and the geographic information database is established. Then the composition of pre-Qing architectural heritage area in Liaoning is analyzed, and its value is evaluated. Finally, the traffic system of pre-Qing architectural heritage area in Liaoning is planned in order to facilitate its future protection. This research shows that the application of GIS for the overall protection of pre-Qing architectural heritage area in Liaoning is scientific, reasonable and feasible. Application of GIS technology can expand and innovate the ideas and approaches of traditional heritage protection, and provides a firm data foundation and powerful technical support for a better research and protection of this large scale type of heritage like heritage area.

To obtain a high‐quality TiC coating on the diamond (D) surface and improve the interfacial properties of metal matrix composites, the optimized molten salt method is used to prepare TiC coatings on the D surface. The effects of NaCl, KCl, and NaCl–KCl molten salts on the uniformity, surface morphology, composition, and bonding ability of TiC coatings are investigated by scanning electron microscopy, energy‐dispersive X‐ray spectroscopy (EDS), X‐ray diffraction, and cold–hot cycling experiments. The results show that the boiling and pickling processes after the molten salt reaction can effectively remove the residual chloride salts and Ti powders to obtain clean TiC‐coated D. The TiC particles of the coating surfaces prepared by NaCl and KCl molten salts are finer and more uniform, which is due to their higher melting points and shorter real reaction time compared with NaCl–KCl mixed salts. The TiC coating prepared by KCl has the best bonding ability and can withstand 50 times as many cold–hot cycles due to its uniform fine deposition particles and appropriate thickness. And, during cold–hot cycles, it can be found that the TiC coating cracking and shedding occur primarily at the edges and corners of the D with internal thermal stress concentration.

No abstract