Figure 7. Typical photocatalytic oxidation and reduciton processess at a TiO 2 nanoparticle. Reprinted with permission from ref 120.
The principal impetus for the fabrication of functional nanotube materials comes from the promise of discovering unique structure-dependant properties and superior performance that are derived from their intrinsic nanotubular architecture. [1][2][3][4] 1D TiO 2 nanotube arrays prepared by the electrochemical anodization of self-organized porous structures on Ti foil [5][6][7] have attracted great research interest in recent years owing to their peculiar architecture, remarkable properties, and potential for wide-ranging applications. Uniform TiO 2 nanotubes are quite remarkably different in structure from other forms of TiO 2 , and are highly ordered, high-aspect-ratio structures with nanocrystalline walls perpendicular to electrically conductive Ti substrates, thereby naturally forming a Schottky-type contact. Moreover, these structures can be directly used as electrodes for photoelectric applications since the size of the nanotubes is very precisely controllable. The technological applications of TiO 2 nanotube arrays are still at an early stage, but these remarkable structures have already been shown to be very promising for applications in sensing, [8] catalysis, [9] photovoltaics, [10] photoelectrolysis, [11] and nanotemplating. [12] The electrical resistance of the TiO 2 nanotubes changes by almost 7 orders of magnitude upon exposure to 1000 ppm H 2 , [13] the largest ever reported sensitivity of a material to a gas. Furthermore, the H 2 evolution rate of TiO 2 nanotube arrays has been reported to be 76 mL hw -1 , [11] which is the highest reported H 2 generation rate for any oxide system upon photoelectrolysis. TiO 2 nanotube arrays have also attracted great interest for enhancing the photocatalytic degradation of various organics, which makes them promising materials for the detection of pollutants. Given the increasing quantities of pollutants that are being dumped into water bodies, environmental monitoring and control have become issues of global concern. Chemical oxygen demand (COD) is one of the most widely used metrics in the field of water-quality analysis in many countries, and is frequently used as an important index for controlling the operation of wastewater treatment plants, wastewater effluent monitoring, and taxation of wastewater pollution. [14] or ultrasound-assisted oxidation.[15]Other alternative assays have also been developed such as electrocatalytic determination using PbO 2 or Cu sensors in thin-cell reactors, [16,17] and photocatalytic and photoelectrocatalytic methods based on TiO 2 nanomaterial sensors. [18,19] However, all these modified K 2 Cr 2 O 7 methods are still plagued by the secondary pollution caused by highly toxic Cr(VI) ions, and moreover, the PbO 2 sensors pose the risk of the potential release of hazardous Pb during the preparation and disposal of the active material of the sensors. As compared to traditional analytical methods, photoelectrocatalytic approaches are more promising because of the superior oxidative abilities of illuminated TiO 2 . Furthermore, TiO 2 ...
Herein, a solution-processed, bottom-up-fabricated, nanowire network electrode is developed. This electrode features a ZnO template which is converted into locally connected, infiltratable, TiO2 nanowires. This new electrode is used to build a depleted bulk heterojunction solar cell employing hybrid-passivated colloidal quantum dots. The new electrode allows the application of a thicker, and thus more light-absorbing, colloidal quantum dot active layer, from which charge extraction of an efficiency comparable to that obtained from a thinner, planar device could be obtained.
We reported a novel method of producing the cross-linked polybutadiene elastomer which could be thermally recycled like the plastic materials without the sacrifice of functional utility. The commercial polybutadiene was first attached with furan via thiol−ene reaction, and the cross-linked network was then built via Diels−Alder click reaction between the bismaleimide and attached furan groups from polybutadiene. The obtained polymer had good solvent resistance from ambient temperature to 100 °C. The mechanical properties of modified polybutadiene could be tailored by the amount of attached furan and the ratio of furan to bismaleimide. Furthermore, the dynamic cross-linked polybutadiene had good thermally remolded and self-healing behaviors. By this method, the dynamic cross-linked polybutadiene could be recycled to use in a sustainable way. Concerning all the raw materials were available in large quantities without tedious and multistep synthetic routes, this work demonstrated the high performance recycling solution to the commercial cross-linked polybutadiene, which might be applied in industry in relatively short time.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.