Designing functional fullerenes with roles beyond defect passivation and electron‐transporting for perovskite solar cells (PSCs) is essential to the development of fullerenes and PSCs. Here, the authors design and synthesize a functional fullerene, FPD, composed of a C60 cage, a porphyrin ring, and three pentafluorophenyl groups. The structure features of FPD enable it can form chemical interactions with the perovskite lattices. These interactions enhance the defect passivation effect and prevent the decomposition of perovskite under irradiation. As a result, the FPD‐based device yields an improved power conversion efficiency of 23% with substantially enhanced operational stability (T80 > 1500 h). Furthermore, once got damaged, the FPD can prevent lead leakage by forming a stable and water‐insoluble complex (FPD‐Pb). Their findings provide a novel strategy to achieve high‐performance and eco‐friendly PSCs with functional fullerene materials.

Tin‐based perovskite solar cells (TPSCs) are attracting intense research interest due to their excellent optoelectric properties and eco‐friendly features. To further improve the device performance, developing new fullerene derivatives as electron transporter layers (ETLs) is highly demanded. Four well‐defined regioisomers (trans‐2, trans‐3, trans‐4, and e) of diethylmalonate‐C60 bisadduct (DCBA) are isolated and well characterized. The well‐defined molecular structure enables us to investigate the real structure‐dependent effects on photovoltaic performance. It is found that the chemical structures of the regioisomers not only affect their energy levels, but also lead to significant differences in their molecular packings and interfacial contacts. As a result, the devices with trans‐2, trans‐3, trans‐4, and e as ETLs yield efficiencies of 11.69%, 14.58%, 12.59%, and 10.55%, respectively, which are higher than that of the as‐prepared DCBA‐based (10.28%) device. Notably, the trans‐3‐based device also demonstrates a certified efficiency of 14.30%, representing one of the best‐performing TPSCs.

Fullerene derivatives are considered excellent materials for the extraction and transportation of electrons in the production of efficient tin-based perovskite solar cells (TPSCs). However, it is not clear how the molecular structure of fullerene derivatives affects the efficiency and stability of TPSCs. In this study, the effects of fullerene derivatives, (6,6)-phenyl-C61-butyric acid hexyl ester (PCBH) and (6,6)-phenyl-C61-butyric acid methyl ester (PCBM), with different functional groups, on photovoltaic performance were investigated. The flexible alkyl chain of PCBH effectively improved the film morphology and stability, the electron extraction and transport capabilities, and the interface contact of fullerene and perovskite. As a result, the PCBH-based TPSC yielded a higher efficiency, of 9.21%, than the PCBM-based devices (7.54%). More importantly, the PCBH-based films exhibited higher stability and effectively suppressed the oxidation of Sn2+ by inhibiting oxygen permeation. Therefore, the PCBH-based devices exhibited significantly enhanced stability. This result indicates that optimizing the functional group of fullerene derivatives is crucial for improving the efficiency and stability of TPSCs.

Tin oxide (SnO2) is widely used as an electron transport layer (ETL) to fabricate planar perovskite solar cells (PSCs) due to their easy and low‐temperature processed fabrication. Enhancing carrier extraction and energy level alignment at the perovskite/SnO2 interface is vital to improve the device performance further. Here, we demonstrate a double‐layered SnO2/ NH4Cl‐SnO2 as an efficient ETL. The top NH4Cl‐SnO2 shows a better energy level alignment with the perovskite and reduced alkalinity to avoid perovskite degradation, resulting in enhanced electron extraction efficiency and interfacial stability. Furthermore, the bottom SnO2 retains the capability of efficient carrier transport to avoid charge accumulation. As a result, we achieve a champion device with a power conversion efficiency of 21.01% and negligible hysteresis. Moreover, the corresponding PSCs show much improved operational stability, retaining 80% of the initial efficiency after 1090 hours of operation at the maximum power point under 1‐sun illumination. While the pristine SnO2 based PSCs only insist on 278 hours before losing 20% of the initial efficiency.

Tin‐based perovskite solar cells (TPSCs) have received great attention due to their eco‐friendly properties and high theoretical efficiencies. However, the fast crystallization feature of tin‐based perovskites leads to poor film quality and limits the corresponding device performance. Herein, a chlorofullerene, C60Cl6, with six chlorine attached to the C60 cage, is applied to modulate the crystallization process and passivate grain boundary defects of the perovskite film. The chemical interactions between C60Cl6 and perovskite components retard the transforming process of precursors to perovskite crystals and obtain a high‐quality tin‐based perovskite film. It is also revealed that the C60Cl6 located at the surfaces and grain boundaries can not only passivate the defects but also offer a role in suturing grain boundaries to suppress the detrimental effects of water and oxygen on perovskite films, especially the oxidation of Sn2+ to Sn4+. As a result, the C60Cl6‐based device yields a remarkably improved device efficiency from 10.03% to 13.30% with enhanced stability. This work provides a new strategy to regulate the film quality and stability of TPSCs using functional fullerene materials.