Carbon–silica dual-phase filler (CSDPF)/natural rubber (NR) vulcanizate was prepared by mechanical blending, followed by a hot-press vulcanization. The dispersion of CSDPF in the NR matrix and the effects of CSDPF on the filler–rubber interaction and structure of the rubber network were studied. Scanning electron microscope results showed that CSDPF dispersed uniformly; however, there were some aggregates of CSDPF when loading too many fillers. With an increase in CSDPF, the interaction between CSDPF and NR chains increases, which was detected by bound rubber in the CSDPF/NR compound. The spectra of solid-state nuclear magnetic resonance revealed that CSDPF could promote the formation of poly-sulfidic crosslink in the rubber vulcanization network. Further, the molecular chain movement ability of vulcanizates decreases according to the spin–spin relaxation of 1H nuclei in CSDPF/NR compounds. The crosslink density of vulcanizate increases, while the chemical crosslink and physical crosslink in the vulcanization network also increase according to the tube model.

Aramid nanofibers (ANFs) were successfully produced by deprotonation of Kevlar fiber followed by grafting epichlorohydrin in dimethyl sulfoxide solution. The ANFs were then incorporated into carboxylated acrylonitrile butadiene rubber (XNBR) by means of latex blending, followed by vulcanization. The interaction between ANFs and XNBR, and the effects of ANFs on the mechanical strength, dielectric properties, and thermal stability of ANF/XNBR nanocomposites were investigated. The results revealed that hydrogen bonding and covalent bonding interactions existed between ANFs and the XNBR matrix and played a critical role in the reinforcement of ANFs to XNBR nanocomposites. After adding 5 phr (parts per hundred rubber) of ANFs, the XNBR nanocomposite exhibited a significant improvement in mechanical properties, namely a 182% increase in tensile strength and a 101% increase in tear strength. In addition, the dielectric constant and thermal properties of ANF/XNBR also increased dramatically. ANFs may thus make an ideal candidate for high-performance rubber materials.

In this work, aramid nanofibers (ANFs)/reduced graphene oxide (ANFs/RGO) film electrodes were prepared by vacuum-assisted filtration, followed by hydroiodic acid reduction. Compared with thermal reduced ANFs/RGO, these as-prepared film electrodes exhibit a combination of mechanical and electrochemical properties with a tensile strength of 184.5 MPa and a volumetric specific capacitance of 134.4 F/cm3 at a current density of 0.125 mA/cm2, respectively. In addition, the film electrodes also show a superior cycle life with 94.6% capacitance retention after 5000 cycles. This kind of free-standing film electrode may have huge potential for flexible energy-storage devices.