Wear is one of the main factors of machine failure. If abnormal wear was not detected in time during the operation of a mechanical system, it probably leads to catastrophic consequences. The wear debris in the lubricating oil circuit contains much information about equipment wear. Consequently, debris detection is regarded as an effective way to detect mechanical faults. In this paper, an inductive debris sensor based on a high-gradient magnetic field is presented for high-throughput lubricating oil circuits. The excitation coil of the sensor is driven by a constant current to generate a high-gradient magnetic field, and the induction coil is wound around the flow path. When wear debris cuts the magnetic line through the flow path, a corresponding induced voltage is generated. The experimental results show that the sensor output signal is linear with the drive current and the wear debris velocity. In addition, the shortest distance between the particles that the sensor output signals can be completely separated is 25 mm. When the distance is smaller, the induced signals are superimposed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.