Microencapsulation of cells by using biodegradable hydrogels offers numerous attractive features for a variety of biomedical applications including tissue engineering. This study highlights the fabrication of microcapsules from an alginate-gelatin crosslinked hydrogel (ADA-GEL) and presents the evaluation of the physico-chemical properties of the new microcapsules which are relevant for designing suitable microcapsules for tissue engineering. Alginate di-aldehyde (ADA) was synthesized by periodate oxidation of alginate which facilitates crosslinking with gelatin through Schiff's base formation between the free amino groups of gelatin and the available aldehyde groups of ADA. Formation of Schiff's base in ADA-GEL and aldehyde groups in ADA was confirmed by FTIR and NMR spectroscopy, respectively. Thermal degradation behavior of films and microcapsules fabricated from alginate, ADA and ADA-GEL was dependent on the hydrogel composition. The gelation time of ADA-GEL was found to decrease with increasing gelatin content. The swelling ratio of ADA-GEL microcapsules of all compositions was significantly decreased, whereas the degradability was found to increase with the increase of gelatin ratio. The surface morphology of the ADA-GEL microcapsules was totally different from that of alginate and ADA microcapsules, observed by SEM. Two different buffer solutions (with and without calcium salt) have an influence on the stability of microcapsules which had a significant effect on the gelatin release profile of ADA-GEL microcapsules in these two buffer solutions.

Due to the relatively poor cell-material interaction of alginate hydrogel, alginate-gelatin crosslinked (ADA-GEL) hydrogel was synthesized through covalent crosslinking of alginate di-aldehyde (ADA) with gelatin that supported cell attachment, spreading and proliferation. This study highlights the evaluation of the physico-chemical properties of synthesized ADA-GEL hydrogels of different compositions compared to alginate in the form of films. Moreover, in vitro cell-material interaction on ADA-GEL hydrogels of different compositions compared to alginate was investigated by using normal human dermal fibroblasts. Viability, attachment, spreading and proliferation of fibroblasts were significantly increased on ADA-GEL hydrogels compared to alginate. Moreover, in vitro cytocompatibility of ADA-GEL hydrogels was found to be increased with increasing gelatin content. These findings indicate that ADA-GEL hydrogel is a promising material for the biomedical applications in tissue-engineering and regeneration.

One polyethylene and nine ethene/α-olefin copolymers differing in amount (0.4−2.9 mol %) and molar mass of the comonomer were characterized by NMR, SEC-MALLS, and rheology. Samples were polymerized using a [Ph2C(2,7-di-t-BuFlu)(Cp)]ZrCl2/MAO catalyst, with octene, octadecene, and hexacosene as comonomers, resulting in polymers of M w ≈ 190 kg/mol. The comonomer content was determined by melt-state NMR. For the homopolymer 0.37 and 0.30 LCB/molecule were found by NMR and SEC-MALLS, respectively. Rheological quantities, such as the zero shear rate viscosity (η0), increased with LCB as compared to linear samples of the same M w. The shape of the viscosity function and the linear steady-state elastic compliance ( ) showed a dependence on comonomer content and length. These findings are used to elucidate the various long-chain branching architectures. The highest comonomer content samples behaved like typical linear polymers in rheological experiments, while those with less comonomer contents were found to be long-chain branched. Besides the comonomer content, the type of comonomer has an influence on the branching structure.

No abstract

Reactive processing with low-molar-mass modifiers is a well-known method to create long-chain branched (LCB) structures in a poly(ethylene terephthalate) (PET) melt. However, less is known about the elongational flow properties of LCB-PET. Therefore, the aim of this contribution is (a) to generate LCB molecules and (b) to evaluate the influence of the branching level on the transient elongational behavior. For this purpose, a commercial, linear PET and different contents (0.1− 0.3 wt %) of the tetrafunctional modifier pyromellitic dianhydride (PMDA) were reactively processed. All samples were analyzed by size exclusion chromatography coupled with a light scattering device and characterized by shear and elongational rheometry. It was found that the molar mass distribution of the modified materials exhibit a high molar mass shoulder, leading to an increase of the weight-average molar mass and a broadening of the molar mass distribution. Moreover, the Mark−Houwink plot of the modified materials displays deviations from the power law toward lower intrinsic viscosities, which indicate the existence of LCB molecules. The shear viscosity shows a pronounced shear thinning behavior and a remarkable increase at low frequencies compared to the linear PET. Considering the transient elongational viscosity, a distinguished strain hardening is observed, which increases with increasing PMDA content and with increasing strain rate. From the results of the rheological and molecular characterization and by considering the chemical reaction mechanisms, it can be concluded that the PET modified with high PMDA contents has a treelike branch-on-branch architecture, which is well-known from low-density polyethylene melts.