No abstract

Infilled frames are usually modelled in the context of global building analysis using simplified procedures without considering the aspects resulting from the interaction between the panel and the frame. Other aspects, such as adequate design of the floor beams and the beam-columns’ joints, and control of potential sliding shear failure of the columns, that significantly affect the structural response, are also typically not accounted for. In the present work it is intended to look over the literature to evaluate the state of the art regarding the lessons learn from recent earthquakes, the evolution of the structural codes considering the infill masonry panels, and how this influences the evolution of the numerical models and the experimental works to overcome the existent gaps.

No abstract

Purpose – When a numerous amount of buildings was built in reinforced concrete, in a period when the regulations did not have the design philosophy for the occurrence of earthquakes, it is of extreme importance to carry out full and effective structural assessments, specially considering and comparing bare frame and infilled structure. The paper aims to discuss these issues. Design/methodology/approach – Among several possibilities to make the evaluation as, simplified, linear analysis and static non-linear analysis, the non-linear dynamic can provide the most accurate numerical behaviour compared to the real one. The time-history non-linear analyses are developed on the software SeismoStruct for different levels of intensity. Local verifications are then applied separately from both Eurocode and Italian Code. Findings – The application of validated models for the analysis of real buildings allows a complete seismic assessment. The level of uncertainty increases integrating particularities regarding the infill masonry walls. The paper shows important global and local seismic safety for these complex typology of buildings. Originality/value – A representative common concrete structure without seismic provisions is first analysed and discussed in terms of global behaviour, deformations and progression of forces. The case study structure is considered both as bare structure and with integrated infill panels. It is also discussed in a local level, about brittle and ductile mechanisms, and extra comparisons between different interpretations of different standards. The case study structure is considered both as bare structure and with integrated infill panels.