The use of polymer ferroelectric dielectrics in organic field-effect transistors (FETs) for nonvolatile memory application was demonstrated more than 15 years ago. The ferroelectric dielectric polyvinylidene fluoride (PVDF) and its copolymers are most widely used for such applications. In addition to memory applications, polymer ferroelectrics as a dielectric layer in organic FETs yield insights into interfacial transport properties. Advantages of polymer ferroelectric dielectrics are their high dielectric constant compared to other polymer dielectrics and their tunable dielectric constant with temperature. Further, the polarization strength may also be tuned by externally poling the ferroelectric dielectric layer. Thus, PVDF and its copolymers provide a unique testbed not just for investigating polarization induced transport in organic FETs, but also enhancing device performance. This article discusses recent developments of PVDF-based ferroelectric organic FETs and capacitors with a focus on tuning transport properties. It is shown that FET carrier mobilities exhibit a weak temperature dependence as long as the dielectric is in the ferroelectric phase, which is attributed to a polarization fluctuation driven process. The low carrier mobilities in PVDF-based FETs can be enhanced by tuning the poling condition of the dielectric. In particular, by using solution-processed small molecule semiconductors and other donor–acceptor copolymers, it is shown that selective poling of the PVDF-based dielectric layer dramatically improves FET properties. Finally, the prospects of further improvement in organic ferroelectric FETs and their challenges are provided.

Fluorination of donor-acceptor copolymers has been one strategy towards enhancing polymer coplanarity, increasing crystallinity, and improving charge transport mechanisms in organic devices. Herein, we report on the synthesis of thiazole...

The use of high κ dielectrics lowers the operating voltage in organic field-effect transistors (FETs). Polymer ferroelectrics open the path not just for high κ values but allow processing of the dielectric films via electrical poling. Poled ferroelectric dielectrics in p-type organic FETs was seen to improve carrier mobility and reduce leakage current when compared to unpoled devices using the same dielectric. For n-type FETs, solution-processed ZnO films provide a viable low-cost option. UV–ozone-treated ZnO films was seen to improve the FET performance due to the filling of oxygen vacancies. P-type FETs were fabricated using the ferroelectric polymer poly(vinylidene fluoride-trifluoroethylene) (PVDF-TrFE) as the dielectric along with a donor–acceptor polymer based on diketopyrrolopyrrole (DPP-DTT) as the semiconductor layer. The DPP-DTT FETs yield carrier mobilities upwards of 0.4 cm2/Vs and high on/off ratios when the PVDF-TrFE layer is electrically poled. For n-type FETs, UV–ozone-treated sol–gel ZnO films on SiO2 yield carrier mobilities of 10−2 cm2/Vs. DPP-DTT-based p- and ZnO-based n-type FETs were used in a complementary voltage inverter circuit, showing promising characteristic gain. A basic inverter model was used to simulate the inverter characteristics, using parameters from the individual FET characteristics.

No abstract