An extended calibration target has been developed for calibrating the intensity output of a multibeam echo sounder (MBES). The target was constructed of chain links arranged similar to a curtain, providing an extended surface target with a mean scattering strength of −17.8 dB at 200 kHz. The target was used to calibrate a 200 kHz MBES, and the MBES was subsequently used to collect seafloor backscatter over sand and gravel seafloors. Field results were compared with calibrated split-beam echo sounder measurements at an incidence angle of 45°. The results suggest that the chain target is a viable MBES calibration tool.

A high average power dense plasma focus (DPF), x-ray point source has been used to produce ∼70 nm line features in AlGaAs-based monolithic millimeter-wave integrated circuits (MMICs). The DPF source has produced up to 12 J per pulse of x-ray energy into 4π steradians at ∼1 keV effective wavelength in ∼2 Torr neon at pulse repetition rates up to 60 Hz, with an effective x-ray yield efficiency of ∼0.8%. Plasma temperature and electron concentration are estimated from the x-ray spectrum to be ∼170 eV and ∼5·1019 cm−3, respectively. The x-ray point source utilizes solid-state pulse power technology to extend the operating lifetime of electrodes and insulators in the DPF discharge. By eliminating current reversals in the DPF head, an anode electrode has demonstrated a lifetime of more than 5 million shots. The x-ray point source has also been operated continuously for 8 h run times at 27 Hz average pulse recurrent frequency. Measurements of shock waves produced by the plasma discharge indicate that overpressure pulses must be attenuated before a collimator can be integrated with the DPF point source.

No abstract

No abstract

No abstract