No abstract

-Modeling, control and implementation of a real redundant robot with five Degrees Freedom (DOF) of the SCARA (Selective Compliant Assembly Robot Arm) manipulator type is presented. Through geometric methods and structural and functional considerations, the inverse kinematics for redundant robot can be obtained. By means of a modification of the classical sliding mode control law through a hyperbolic function, we get a new algorithm which enables reducing the chattering effect of the real actuators, which together with the learning and adaptive controllers, is applied to the model and to the real robot. A simulation environment including the actuator dynamics is elaborated. A 5 DOF robot, a communication interface and a signal conditioning circuit are designed and implemented for feedback. Three control laws are executed in: a simulation structure (together with the dynamic model of the SCARA type redundant manipulator and the actuator dynamics) and a real redundant manipulator of the SCARA type carried out using MatLab/Simulink programming tools. The results, obtained through simulation and implementation, were represented by comparative curves and RMS indices of the joint errors, and they showed that the redundant manipulator, both in the simulation and the implementation, followed the test trajectory with less pronounced maximum errors using the adaptive controller than the other controllers, with more homogeneous motions of the manipulator.

In this paper, the modeling of a redundant SCARA-type manipulator robot with five degrees of freedom is presented. We propose three controllershyperbolic sine-cosine, sliding mode, and calculated torque -which are applied to the discussed model. A simulation environment is developed using MatLab/Simulink programming tools. This simulation environment is employed to perform several tests (including actuatorsʹ dynamics) on the model of the redundant manipulator, with each different controller, under path tracking requirements. Results were obtained from comparative curves and rms index for joints and Cartesian errors.

In this article, we propose a new scheme for a fuzzy logic controller, which includes acceleration as one of its linguistic variables, as opposed to other techniques and approaches that have been developed and reported in the literature. This method is used for controlling the tracking of the trajectory followed by the joints of a 2-DoF manipulator robot. To this end, a complete simulation environment is developed through the MatLab/Simulink® software. The dynamic model of the manipulator robot includes a vector that consists of the estimate of the friction forces present in the joints. Then, a controller based on fuzzy logic is designed and implemented for each joint. Finally, the performance of the developed system is assessed and then compared to the performance of a classic PID controller. The incorporation of the fuzzy variable acceleration significantly improved the system’s response.

No abstract