[1] Surrogate technologies to continuously monitor suspended sediment show promise toward supplanting traditional data collection methods requiring routine collection and analysis of water samples. Commercially available instruments operating on bulk optic (turbidity), laser optic, pressure difference, and acoustic backscatter principles are evaluated based on cost, reliability, robustness, accuracy, sample volume, susceptibility to biological fouling, and suitable range of mass concentration and particle size distribution. In situ turbidimeters are widely used. They provide reliable data where the point measurements can be reliably correlated to the river's mean cross section concentration value, effects of biological fouling can be minimized, and concentrations remain below the sensor's upper measurement limit. In situ laser diffraction instruments have similar limitations and can cost 6 times the approximate $5000 purchase price of a turbidimeter. However, laser diffraction instruments provide volumetric-concentration data in 32 size classes. Pressure differential instruments measure mass density in a water column, thus integrating substantially more streamflow than a point measurement. They are designed for monitoring medium-to-large concentrations, are generally unaffected by biological fouling, and cost about the same as a turbidimeter. However, their performance has been marginal in field applications. Acoustic Doppler profilers use acoustic backscatter to measure suspended sediment concentrations in orders of magnitude more streamflow than do instruments that rely on point measurements. The technology is relatively robust and generally immune to effects of biological fouling. Cost of a single-frequency device is about double that of a turbidimeter. Multifrequency arrays also provide the potential to resolve concentrations by clay silt versus sand size fractions. Multifrequency hydroacoustics shows the most promise for revolutionizing collection of continuous suspended sediment data by instruments that require only periodic calibration for correlation to mean concentrations in river cross sections. Broad application of proven suspended sediment surrogate technologies has the potential to revolutionize fluvial sediment monitoring. Once applied, benefits could be enormous, providing for safer, more frequent and consistent, arguably more accurate, and ultimately less expensive sediment data for managing the world's sedimentary resources.

Cover: Impact plate array for measuring bedload transport in the Erlenbach stream, Switzerland (upstream view of the sediment retention basin, with plates visible in the left side of the curved check dam crest, and (inset) water falling into an automatically driven basket-type bedload sampler). Geophone sensors are mounted underneath the steel plates at the crest of the check dam. The movable bedload-collection basket provides calibration data for the acoustic data produced by the impact plates. See figures 12 and 13. Photographs courtesy of Dieter Rickenmann, Swiss Federal Research Institute. For an overview of USGS information products, including maps, imagery, and publications, visit Bedload-Surrogate Monitoring Technologies

We recorded the activity of the right and left descending contralateral movement detectors responding to 10-cm (small) or 20-cm (large) computer-generated spheres approaching along different trajectories in the locust's frontal field of view. In separate experiments we examined the steering responses of tethered flying locusts to identical stimuli. The descending contralateral movement detectors were more sensitive to variations in target trajectory in the horizontal plane than in the vertical plane. Descending contralateral movement detector activity was related to target trajectory and to target size and was most sensitive to small objects converging on a direct collision course from above and to one side. Small objects failed to induce collision avoidance manoeuvres whereas large objects produced reliable collision avoidance responses. Large targets approaching along a converging trajectory produced steering responses that were either away from or toward the side of approach of the object, whereas targets approaching along trajectories that were offset from the locust's mid-longitudinal body axis primarily evoked responses away from the target. We detected no differences in the discharge properties of the descending contralateral movement detector pair that could account for the different collision avoidance behaviours evoked by varying the target size and trajectories. We suggest that descending contralateral movement detector properties are better suited to predator evasion than collision avoidance.

These data will help guide exercise selection for individuals with differing training objectives and injury history.

Guidelines and procedures for computing timeseries suspended-sediment concentrations and loads from in-stream turbidity-sensor and streamflow data: U.S. Geological Survey Techniques and Methods, book 3, chap. C4, 52 p.