The anisotropy of liquid crystalline elastomers (LCEs) is derived from the interaction-facilitated orientation of the molecular constituents. Here, we correlate the thermomechanical response of a series of LCEs subjected to mechanical alignment to measurements of the Hermans orientation parameter. The LCEs were systematically prepared with varying concentrations of liquid crystalline mesogens, which affects the relative degree of achievable order. These compositions were subject to varying degrees of mechanical alignment to prepare LCEs with orientations that span a wide range of orientation parameters. The stimuli-response of the LCEs indicates that the liquid crystalline content defines the temperature of actuation, whereas the orientation parameter of the LCE is intricately correlated to both the total actuation strain of the LCE as well as the rate of thermomechanical response.

The large, directional stimuli-response of aligned liquid crystalline elastomers (LCEs) could enable functional utility in robotics, medicine, consumer goods, and photonics. The alignment of LCEs has historically been realized via mechanical alignment of a two-stage reaction. Recent reports widely utilize chain extension reactions of liquid crystal monomers (LCM) to form LCEs that are subject to either surface-enforced or mechanical alignment. Here, we prepare LCEs that contain intra-mesogenic supramolecular bonds synthesized via direct free-radical chain transfer photopolymerization processible by a distinctive mechanical alignment mechanism. The LCEs were prepared by the polymerization of a benzoic acid monomer (11OBA), which dimerized to form a liquid crystal monomer, with a diacrylate LCM (C6M). The incorporation of the intra-mesogenic hydrogen bonds increases the achievable nematic order from mechanical programming. Accordingly, LCEs prepared with larger 11OBA concentration exhibit higher magnitude thermomechanical strain values when compared to a LCE containing only covalent bonds. These LCEs can be reprogrammed with heat to return the aligned film to the polydomain state. The LCE can then be subsequently programmed to orient in a different direction. The facile preparation of (re)programmable LCEs with supramolecular bonds opens new avenues for the implementation of these materials as shape deployable elements.

Liquid crystalline elastomers (LCE) are thermally cyclable, compliant actuators with compelling mechanical properties. The large and programmable deformation of LCE has led to numerous functional examinations spanning optics, medical devices, and robotics. A well-established method to prepare complex LCE actuators is to utilize surface-enforced photoalignment. Herein, a facile and scalable approach is reported to circumvent the physical limits of surface-enforced alignment (e.g., samples that are 50 μm or less) to amplify the achievable force output in LCE. Applying an approach termed direct layering, the thermomechanical response of LCE elements prepared with +1 disclination patterns in a range of compositions and thicknesses is contrasted. The design and preparation of +1 disclination patterns and arrays is explored to assess the contribution of sample geometry and overlap to deformation and force output. The methodology detailed in this contribution allows for the preparation of elements ≈1 mm in thickness that are capable of actuating large objects. Furthermore, the fabrication of these elements uniquely enables the realization of mechanical instabilities to hasten the actuation rate in response to thermal change and to enable leaping.

Background and Objective Clinical trials investigating the benefits of vagus nerve stimulation (VNS) in heart failure have shown mixed results. This variation maybe due to inconsistent stimulation parameters, which may fail to adequately stimulate cardiomotor fibers required for cardio‐protection. However, overstimulation of the vagus nerve may cause adverse off‐target effects. Thus, the aim of this study was to assess the beneficial effects of moderate frequency VNS in patients with structurally normal hearts (SNH) and those with cardiomyopathy (CM). Hypothesis Moderate frequency VNS (10 Hz) confers ventricular electrophysiological effects. Methods Patients with SNH and supraventricular tachycardia (n = 5) and cardiomyopathy patients with ventricular tachycardia (CM, n = 5) undergoing electrophysiology procedures were recruited. A multi‐electrode circular electrophysiology catheter was advanced from the femoral to the right internal jugular vein via a long sheath. Bipolar electrode pairs were serially stimulated and capture/stimulation of the vagus nerve identified by a negative chronotropic response. Threshold current was defined as a 10‐15% decrease in heart rate (HR) at 20 Hz and 1 ms pulse‐width. Stimulation was then performed at threshold current for 10 seconds at 10 and 20 Hz. Endocardial unipolar electrograms were continuously recorded using ventricular multielectrode mapping catheters and used to calculate activation recovery intervals (ARI), a validated surrogate of local action potential duration (APD). Electrodes were designated as overlying scar, border zone, or viable myocardium based on standard bipolar voltage mapping criteria in CM patients. ARIs were corrected for HR by the Framingham method. Results The current of stimulation was 13.2 ± 1.7 mA in SNH and 14.4 ± 3.1 mA in CM (p = ns). VNS at 20 Hz significantly decreased HR (p ≤ 0.01) in both SNH and CM patients (12.6 ± 1.4% in SNH vs 12.9 ± 1.7% in CM, p= ns) while significantly prolonging global ventricular ARIs (2.2 ± 0.4% in SNH vs 4.6 ± 1.0% in CM, p= ns). The chronotropic effects of 10 Hz VNS were similar to 20 Hz in SNH (12.0 ± 1.4% at 10 Hz vs 12.6 ± 1.4% at 20 Hz, p = ns) but blunted in CM patients (12.0 ± 1.4% in SNH vs 4.9 ± 2.4% in CM, p≤ 0.05). Surprisingly, despite reduced chronotropic responses, global ARI prolongation persisted (4.0 ± 0.7% at 10 Hz vs 4.6 ± 1.0% at 20 Hz, p= ns) in CM patients. Importantly, ARI prolongation was observed in scar (326 ± 23 to 340 ± 22 ms, p≤ 0.05) and border zone regions (312 ± 18 ms to 323 ± 17 ms, p≤ 0.05). Moreover, after correcting ARI for heart rate (ARIc), 10 Hz VNS in CM patients caused significantly greater prolongation in ARIc than 20 Hz (1.8 ± 0.6% at 10 Hz vs ‐1.0 ± 0.6% at 20 Hz, p≤ 0.05), suggesting that higher frequency VNS may potentially cause a net shortening of ventricular APD. Conclusions Acute application of moderate frequency VNS (10 Hz) demonstrated ventricular electrophysiological effects, with ARI prolongation observed in scar and border zone regions in diseased hearts. This...

Liquid Crystalline Elastomer In article number 2202067, Timothy J. White and coworkers study the mechanics and topography of stacked liquid crystalline elastomer elements by loading them with glass and imaging them with optical profilometry. Cover Art by Dr. Joselle M. McCracken.