No abstract

The Engineering Meetings Board has approved this paper for publication. It has successfully completed SAE's peer review process under the supervision of the session organizer. This process requires a minimum of three (3) reviews by industry experts. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE.

A thermal process has been developed to create 3D cover glass for mobile device applications. After forming, the glass is ionexchanged to make a strong, damage-resistant structure. The response of this glass to stress and damage events is equivalent to that of 2D Corning® Gorilla® Glass.

Response of brittle plate-like structures to impact loads (suddenly applied loads) has been the subject of many research studies. Specifically, glass used in various household, consumer electronics applications can be subjected to different kinds of impact loads. An ion-exchanged alumino-silicate glass developed by Corning Incorporated, also called Corning® Gorilla® Glass is used as cover glass for flat-panel televisions. One of the reliability tests that may be required for this application is that a steel ball of certain diameter is dropped from certain height at different locations on the glass panel mounted onto a frame. The requirement is that the glass should survive 2 J of impact energy at the center of the glass and 0.5 J of impact energy at the edges. These reliability requirements could change depending on the application and the customer. In this study, finite element analysis is carried out to understand the impact response of such glass panels. Experiments are conducted using strain gauges to measure the panel response at the center of glass with impacts up to 3.3 J. Finite element analysis results are then validated by comparing the predicted strain response with those of measurements.