A new composite chitosan biosorbent was prepared by coating chitosan, a glucosamine biopolymer, onto ceramic alumina. The composite bioadsorbent was characterized by high-temperature pyrolysis, porosimetry, scanning electron microscopy, and X-ray photoelectron spectroscopy. Batch isothermal equilibrium and continuous column adsorption experiments were conducted at 25 degrees C to evaluate the biosorbent for the removal of hexavalent chromium from synthetic as well as field samples obtained from chrome plating facilities. The effect of pH, sulfate, and chloride ion on adsorption was also investigated. The biosorbent loaded with Cr(VI) was regenerated using 0.1 M sodium hydroxide solution. A comparison of the results of the present investigation with those reported in the literature showed that chitosan coated on alumina exhibits greater adsorption capacity for chromium(VI). Further, experimental equilibrium data were fitted to Langmuir and Freundlich adsorption isotherms, and values of the parameters of the isotherms are reported. The ultimate capacity obtained from the Langmuir model is 153.85 mg/g chitosan.

No abstract

No abstract

We report here the synthesis and characterization of two new classes of chelating fibers, namely, (1) polymercaptopropylsilsesquioxane (PMPS) and (2) copper(II) ferrocyanide complexed with poly[1-(2-aminoethyl)-3-aminopropyl]silsesquioxane (Cu-FC-PAEAPS) fibers. These fibers were evaluated for selective removal of trace amount of mercury and cesium ions respectively in the presence of competing metal ions from water. The PMPS and Cu-FC-PAEAPS fibers were prepared by coating their corresponding soluble prepolymers, which are derived from mercaptopropyltrimethoxysilane and [1-(2-aminoethyl)-3-aminopropyl]trimethoxysilane monomers, respectively, on a glass fiber substrate, followed by a cross-linking step at 120 degrees C. The fibers were characterized through infrared spectroscopy, scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). These novel materials are extremely efficient in removing low concentrations of mercury and cesium ions from water in the presence of high concentrations of sodium or potassium ions. They were shown to remove trace mercury and cesium contaminants effectively to well below parts per billion concentrations under a variety of conditions.

No abstract