Inspired by the rolling mechanism of the proboscis of a butterfly, rollable electronics that can be rolled and unrolled to a great extent on demand are developed. Generally, electronic devices that are attached to various surfaces to acquire biosignals require mechanical flexibility and sufficient adhesive force. The rollable platform provides sufficient force that grips onto the entire target surface without destroying the target organ. To prove the versatility of our device not only in gripping and detecting biosignals from micro objects but also in performing a variety of functions, thin-film electronics including a heater, strain sensor and temperature sensor are constructed on the rollable platform, and it is confirmed that all the electronics operate normally in the rolled and unrolled states without breakdown. Then, micro bio-objects are gripped by using the rollable platform, and their tiny motions are successfully detected with the sensor on the platform. Furthermore, the detection of the pulse wave signals of swine under diverse experimental conditions is successfully conducted by rolling up the rollable system around the blood vessel of the swine, the result of which proves the feasibility of a rollable platform as a biomedical device.

No abstract

The development of breast implant technology continues to evolve over time, but changes in breast shape after implantation have not been fully elucidated. Thus, we performed computerized finite element analysis in order to better understand the trajectory of changes and stress variation after breast implantation. The finite element analysis of changes in breast shape involved two components: a static analysis of the position where the implant is inserted, and a dynamic analysis of the downward pressure applied in the direction of gravity during physical activity. Through this finite element analysis, in terms of extrinsic changes, it was found that the dimensions of the breast implant and the position of the top-point did not directly correspond to the trajectory of changes in the breast after implantation. In addition, in terms of internal changes, static and dynamic analysis showed that implants with a lower top-point led to an increased amount of stress applied to the lower thorax. The maximum stress values were 1.6 to 2 times larger in the dynamic analysis than in the static analysis. This finding has important implications for plastic surgeons who are concerned with long-term changes or side effects, such as bottoming-out, after anatomic implant placement.