Alkali anion exchange membrane (AEM) based devices have the potential for electrochemical energy conversion using inexpensive catalysts and a variety of fuel types. Membrane stability and anion transport must be improved in AEMs before these devices can be fully realized. Mechanical failure of the membrane can contribute to failure of the device, thus membrane durability is critical to overall system design. Here, a study of the mechanical properties of three well-established AEMs uses a modified extensional rheometer platform to simulate tensile testing using small membrane samples. Mechanical properties were tested at 30 and 60 • C under dry or water saturated gas conditions. Water in the membrane has a plasticizing effect, softening the membrane and reducing strength. PEEK membrane reinforcement limits swelling producing negligible softening and only a 9% decrease in strength from dry to hydrated conditions at 30 • C. Higher cation concentration increases water uptake resulting in significant softening, a 57% reduction in Young's modulus, and a 67% reduction in strength when hydrated at 30 • C. In a working electrochemical device, AEMs must maintain integrity over a range of temperatures and hydrations, making it critical to considering mechanical properties when designing new membranes. Polymer electrolyte membrane fuel cells and electrolyzers are potentially disruptive technologies that will replace traditional heat engines such as internal combustion engines for transportation applications, portable electronics, and are scalable to larger energy storage facilities. Polymer electrolyte membrane fuel cells are suitable for transportation applications due to their low temperature start-up and operation, high power density, and quick refueling.1-3 Proton exchange membranes (PEMs) have dominated polymer electrolyte membrane fuel cell development in the last several decades, resulting in the development of relatively stable, well performing membranes.1-4 Current PEM fuel cells remain cost prohibitive due to high catalysts costs, as well as long-term durability issues. 3,5,6 Anion exchange membranes (AEMs) can also be utilized in polymer electrolyte membrane devices and have several potential benefits over PEMs. AEM fuel cells benefit from increased kinetics in an alkali media allowing more complex fuels then hydrogen and have the potential to utilize non-platinum catalysts to reduce costs. 7-11However, a number of challenges must be overcome before AEMs reach the performance and durability necessary for fuel cells and other electrochemical energy conversion devices. Hydroxide present in the AEM degrades many of the proposed cationic groups and some polymer backbones, making development of chemically stable AEMs difficult. 9,11,12 Additionally, transport of hydroxide in AEMs is inherently slower than protons in PEMs, 13 to compensate, the concentration of ionic groups is often increased in AEMs.8 Increasing ion concentration in AEMs increases water sorption in the polymer and can result in significant dimensional...