The symmetry properties of split ring resonators (SRRs) are exploited for the implementation of novel sensing devices. The proposed structure consists of a coplanar waveguide (CPW) loaded with movable SRRs on the back substrate side. It is shown that if the SRRs are placed with the slits aligned with the symmetry plane of the CPW, the structure is transparent to signal propagation. However, if the symmetry is broken, a net axial magnetic field can be induced in the inner region of the SRRs, and signal propagation is inhibited at resonance. The proposed structures can be useful as alignment sensors, position sensors and angle sensors. This novel sensing principle is validated through experiment.

This paper is focused on the analysis of coplanar waveguides (CPWs) loaded with circularly shaped electric-LC (ELC) resonators, the latter consisting of two coplanar loops connected in parallel through a common gap. Specifically, the resonator axis is aligned with the CPW axis, and a dynamic loading with ELC rotation is considered. Since the ELC resonator is bisymmetric, i.e., it exhibits two orthogonal symmetry planes, the angular orientation range is limited to 90 . It is shown that the transmission and reflection coefficients of the structure depend on the angular orientation of the ELC. In particular, the loaded CPW behaves as a transmission line-type (i.e., all-pass) structure for a certain ELC orientation (0 ) since the resonator is not excited. However, by rotating the ELC, magnetic coupling to the line arises, and a notch in the transmission coefficient (with orientation dependent depth and bandwidth) appears. This feature is exploited to implement angular displacement sensors by measuring the notch depth in the transmission coefficient. To gain more insight on sensor design, the lumped element equivalent-circuit model for ELC-loaded CPWs with arbitrary ELC orientation is proposed and validated. Based on this approach, a prototype displacement sensor is designed and characterized. It is shown that by introducing additional elements (a circulator and an envelope detector), novel and high precision angular velocity sensors can also be implemented. An angular velocity sensor is thus proposed, characterized, and satisfactorily validated. The proposed solution for angular sensing is robust against environmental variations since it is based on the geometrical alignment/misalignment between the symmetry planes of the coupled elements.

This paper is focused on the application of complementary split-ring resonators (CSRRs) to the suppression of the common (even) mode in microstrip differential transmission lines. By periodically and symmetrically etching CSRRs in the ground plane of microstrip differential lines, the common mode can be efficiently suppressed over a wide band whereas the differential signals are not affected. Throughout the paper, we present and discuss the principle for the selective common-mode suppression, the circuit model of the structure (including the models under even-and odd-mode excitation), the strategies for bandwidth enhancement of the rejected common mode, and a methodology for common-mode filter design. On the basis of the dispersion relation for the common mode, it is shown that the maximum achievable rejection bandwidth can be estimated. Finally, theory is validated by designing and measuring a differential line and a balanced bandpass filter with common-mode suppression, where double-slit CSRRs (DS-CSRRs) are used in order to enhance the common-mode rejection bandwidth. Due to the presence of DS-CSRRs, the balanced filter exhibits more than 40 dB of common-mode rejection within a 34% bandwidth around the filter pass band.

This paper proposes a compact reconfigurable (bandstop/bandpass) and frequency-tunable structure based on S-shaped split ring resonators (S-SRRs). It is known that an S-SRR coupled to a coplanar waveguide (CPW) provides a stopband in the transmission characteristic of the line. It is shown here that this behaviour of the S-SRR can be switched between fundamental resonance and second harmonic response by introduction of a PIN diode in the center segment of the S-SRR. Alternatively, if the S-SRR is loaded with a varactor diode instead of a switch, the frequency of the stopband can be continuously tuned from the S-SRRs fundamental resonance frequency to its second harmonic. Furthermore, it is shown that if a pair of shunt PIN diodes are introduced across the slots of the host CPW, the structure can be reconfigured from a bandstop to a bandpass structure. Thus, the proposed resonator structure can be used as the building block of reconfigurable (bandstop/bandpass) filters with tunable operating frequency. Finally, in order to demonstrate a practical application of the proposed structure, an ultrawideband antenna with a tunable band-notch is designed and experimentally validated.Index Terms-Reconfigurable antennas, S-shaped split ring resonator (S-SRR), ultrawideband antenna.

In this paper compact alignment and position sensors based on coplanar waveguide (CPW) transmission lines loaded with split ring resonators (SRRs) are proposed. The structure consists of a folded CPW loaded with two SRRs tuned at different frequencies to detect both the lack of alignment and the two-dimensional linear displacement magnitude. Two additional resonators (also tuned at different frequencies) are used to detect the displacement direction. The working principle for this type of sensor is explained in detail, and a prototype device to illustrate the potential of the approach has been designed and fabricated.