The optical Vernier effect provides magnification of the sensing capabilities of an interferometer, allowing unprecedented sensitivities and resolutions to be achieved. Just like a calliper uses two different scales to achieve higher resolution measurements, the optical Vernier effect is based on the overlap between the responses of two interferometers with slightly detuned interference signals. Here we present in detail, as a novel approach, the generation of optical harmonics of the Vernier effect with Fabry-Perot interferometers, where the two interferometers can have very different frequencies in the interferometric pattern. We demonstrate not only a considerable enhancement, but also a better control of the sensitivity magnification factor, which scales up with the order of the harmonics, breaking the limits of the conventional Vernier effect as used today. In addition, this novel concept opens also new ways of dimensioning the sensing structures, together with improved fabrication tolerances.

The increasing fields of applications for modern optical fibers present great challenges to the material properties and the processing technology of fiber optics. This paper gives an overview of the capabilities and limitations of established vapor deposition fiber preform technologies, and discusses new techniques for improved and extended doping properties in fiber preparation. In addition, alternative fabrication technologies are discussed, such as a powder-based process (REPUSIL) and an optimized glass melting method to overcome the limits of conventional vapor deposition methods concerning the volume fabrication of rare earth (RE)-doped quartz and high silica glasses. The new preform technologies are complementary with respect to enhanced RE solubility, the adjustment of nonlinear fiber properties, and the possibility of hybrid fiber fabrication. The drawing technology is described based on the requirements of specialty fibers such as adjusted preform and fiber diameters, varying coating properties, and the microstructuring of fiber configurations as low as in the nanometer range.

Guiding light inside the hollow cores of microstructured optical fibers is a major research field within fiber optics. However, most of current fibers reveal limited spectral operation ranges between the mid-visible and the infrared and rely on complicated microstructures. Here we report on a new type of hollow-core fiber, showing for the first time distinct transmission windows between the deep ultraviolet and the near infrared. The fiber, guiding in a single mode, operates by the central core mode being anti-resonant to adjacent modes, leading to a novel modified tunneling leaky mode. The fiber design is straightforward to implement and reveals beneficial features such as preselecting the lowest loss mode (Gaussian-like or donut-shaped mode). Fibers with such a unique combination of attributes allow accessing the extremely important deep-UV range with Gaussian-like mode quality and may pave the way for new discoveries in biophotonics, multispectral spectroscopy, photo-initiated chemistry or ultrashort pulse delivery.

Fiber-enhanced Raman spectroscopy was developed for the chemically selective and sensitive quantification of the important antibiotic cefuroxime in human urine. A novel optical sensor fiber was drawn and precisely prepared. In this fiber structure, light is strongly confined in the selectively filled liquid core, and the Raman scattered signal is collected with unprecedented efficiency over an extended interaction length. The filling, emptying, and robustness are highly improved due to the large core size (>30 μm). Broadband step-index guidance allows the free choice of the most suitable excitation wavelength in complex body fluids. The limit of detection of cefuroxime in human urine was improved by 2 orders of magnitude (to μM level). The quantification of cefuroxime was achieved in urine after oral administration. This method has great potential for the point-of-care monitoring of antibiotics concentrations and is an important step forward to enable clinicians to rapidly adjust doses.

We present an approach how to combine large-mode field diameters with effective single-mode guidance in a hollow-core antiresonant optical fiber. We demonstrate experimentally and in simulations that single-mode guidance is achieved in a simplified hollow-core fiber design with a core diameter of 30 μm by shifting the effective indices of the first cladding modes close to those of higher order core modes. Our fiber shows low loss propagation and effective single-mode operation from the near infrared to deep ultraviolet wavelengths down to 270 nm on a loss level of approximately 3  dB/m.