Phycocyanin is a blue natural food colorant with multiple health benefits. Here we propose an efficient phycocyanin extraction method from Arthrospira platensis from Mexico. Three extraction methods were applied to optimize the extraction process, using water and buffer as solvents, with three pH values at two agitation times. The highest phycocyanin, 54.65 mg/g, was extracted from dry biomass with water as a solvent using an ultrasonication bar. The optimum condition of extraction was determined to be 1:50 biomass/solvent ratio for dry biomass, with the freeze/thaw method for 20 min repeated twice, and then agitated at 120 rpm for 24 h. The phycocyanin content was 48.88 mg/g biomass, with a purity of 0.47. For scalable phycocyanin productivity, the sonication method is recommended as there is no statistical difference. The phycocyanin stability was best at − 20 °C storage temperature at pH 7 for 35 days. Partial purification with ammonium sulfate was found to be suitable as a fractional precipitation method, first at 0–20% and then 20–65%, to get purity nearly 1. Total protein was found to be 55.52%, and total amino acids after phycocyanin extraction was 33%. The maximum phycocyanin yield using water as a solvent was the most interesting result regardless of the method used for extraction.

The processing of Mexican limes generates great amounts of peel as a by-product. Lime peel is mainly rich in the flavonoid hesperidin, whose bioactivity is oriented mainly to cardiovascular diseases and cancer. The purpose of this work was to develop a green process for the extraction and purification of hesperidin from Mexican lime peel. The extraction of hesperidin was investigated on a laboratory scale by varying the solvent composition and the solid-to-solvent ratio, and then scaling this process (volume: 20 L). Next, a purification process using adsorption resins was assessed: first through static tests to determine the adsorption efficiency with two resins (FPX66, EXA118), and then on a packed column with 80 mL of resin at 25 °C. Lab-scale extraction showed that the best conditions were a solid-to-solvent ratio of 0.33 g/mL and 60% ethanol. After using these conditions at pilot scale and concentrating the solution, the hesperidin content of the extract was 0.303 mg/mL. Through static tests, higher adsorption efficiencies were achieved with the EXA-118 resin and diluted extract (4:6 ratio with 10% dimethylsulfoxide, (DMSO)). Finally, the purification process on a packed column from the diluted extract (hesperidin concentration of 0.109 mg/mL) had a mean recovery efficiency of almost 90%.

Blackberries and raspberries are highly perishable and fragile products, which limits their shelf life. The effect of biodegradable active packaging of blackberries and raspberries containing 2.5% and 5.0% weight (wt%) of thymol or carvacrol complexed in β-cyclodextrins (β-CDs), successively added to poly (lactic acid) (PLA), and melt-processed by injection molding was evaluated under stored conditions at 4 °C for 21 days, using as reference commercial clamshell and PLA package control samples. Thus, physicochemical, headspace, microbiological, and sensory quality studies were carried out in order to compare the efficacy of the different packages. Concerning weight loss, color, and total phenolic and soluble solids content, significant differences were detected when compared with commercial clamshell packaging. The results show that the PLA packages containing thymol and carvacrol complexes maintained the color, weight, and phenolic content of berries until day 21, with a score up to 45% better compared to commercial clamshell. The headspace analysis detected 101 mg L−1 (ppm) of thymol and 35 ppm of carvacrol on the first day of refrigeration; these concentrations decreased with time. This release mechanism of carvacrol and thymol into the PLA package modified the initial atmosphere composition. After 21 days of storage, the berries had 4.25 degrees of acceptance, without adverse perception of aroma or flavor for both carvacrol and thymol compounds. A general microbial inhibition was observed for yeast and molds, which increased with the concentration of monoterpene in PLA packages, and showed an inhibition of 3.5 log units for PLA packages containing thymol, and of 3 log units for those containing carvacrol. Overall results show that PLA/β-CD-thymol 5.0% packages prolonged raspberries’ and blackberries’ shelf life by one more week at 4 °C, compared with commercial clamshell packaging.

The citrus industry is one of the most important economic areas within the global agricultural sector. Persian lime is commonly used to produce lime juice and essential oil, which are usually obtained by batch distillation. The aim of this work was to validate a patented continuous steam distillation process and to both physically and chemically characterize the volatile fractions of essential Persian lime oil. Prior to distillation, lime juice was obtained by pressing the lime fruit. Afterwards, the juice was subjected to a continuous steam distillation process by varying the ratio of distillate flow to feed flow (0.2, 0.4, and 0.6). The distillate oil fractions were characterized by measuring their density, optical rotation, and refractive index. Gas chromatography GC-FID was used to analyze the chemical compositions of the oil fractions. The process of continuous steam distillation presented high oil recovery efficiencies (up to 90%) and lower steam consumption compared to traditional batch process distillation since steam consumption ranged from 32 to 60% for different steam levels. Moreover, a reduction in process time was observed (from 8 to 4 h). The oil fractions obtained via continuous steam distillation differed significantly in their composition from the parent compounds and the fractions.

Probiotic bacteria are widely used to prepare pharmaceutical products and functional foods because they promote and sustain health. Nonetheless, probiotic viability is prone to decrease under gastrointestinal conditions. In this investigation, Lactiplantibacillus plantarum spp. CM-CNRG TB98 was entrapped in a gelatin–poly (vinyl alcohol) (Gel–PVA) hydrogel which was prepared by a “green” route using microbial transglutaminase (mTGase), which acts as a crosslinking agent. The hydrogel was fully characterized and its ability to entrap and protect L. plantarum from the lyophilization process and under simulated gastric and intestine conditions was explored. The Gel–PVA hydrogel showed a high probiotic loading efficiency (>90%) and survivability from the lyophilization process (91%) of the total bacteria entrapped. Under gastric conditions, no disintegration of the hydrogel was observed, keeping L. plantarum protected with a survival rate of >94%. While in the intestinal fluid the hydrogel is completely dissolved, helping to release probiotics. A Gel–PVA hydrogel is suitable for a probiotic oral administration system due to its physicochemical properties, lack of cytotoxicity, and the protection it offers L. plantarum under gastric conditions.