No abstract

Renewable energy is an attractive solution for water pumping systems particularly in isolated regions where the utility grid is unavailable. An attempt is made to improve the performance of solar photovoltaic water pumping system (SPVWPS) under partial shading condition. Under this condition, the power versus voltage curve has more than one maximum power point (MPP), which makes the tracking of global MPP not an easy task. Two MPP tracking (MPPT) strategies are proposed and compared for tracking MPP of SPVWPS under shading condition. The first method is based on the classical perturb and observe (P&O) and the other method is based on a Salp Swarm Algorithm (SSA). Based on extensive MATLAB simulation, it is found that the SSA method can provide higher photovoltaic (PV) generated power than the P&O method under shading condition. Consequently, the pump flowrate is increased. But, under normal distribution of solar radiation, both MPPT techniques can extract the maximum power but SSA is considered a time-consuming approach. Moreover, SSA is compared with particle swarm optimization (PSO) and genetic algorithm (GA). The obtained results ensure the superiority of SSA compared with PSO and GA. SSA has high successful rate of reaching true global MPP.

In this study, a simulation-based coyote optimization algorithm (COA) to identify the gains of PI to ameliorate the water-pumping system performance fed from the photovoltaic system is presented. The aim is to develop a stand-alone water-pumping system powered by solar energy, i.e., without the need of electric power from the utility grid. The voltage of the DC bus was adopted as a good candidate to guarantee the extraction of the maximum power under partial shading conditions. In such a system, two proportional-integral (PI) controllers, at least, are necessary. The adjustment of (Proportional-Integral) controllers are always carried out by classical and tiresome trials and errors techniques which becomes a hard task and time-consuming. In order to overcome this problem, an optimization problem was reformulated and modeled under functional time-domain constraints, aiming at tuning these decision variables. For achieving the desired operational characteristics of the PV water-pumping system for both rotor speed and DC-link voltage, simultaneously, the proposed COA algorithm is adopted. It is carried out through resolving a multiobjective optimization problem employing the weighted-sum technique. Inspired on the Canis latrans species, the COA algorithm is successfully investigated to resolve such a problem by taking into account some constraints in terms of time-domain performance as well as producing the maximum power from the photovoltaic generation system. To assess the efficiency of the suggested COA method, the classical Ziegler–Nichols and trial–error tuning methods for the DC-link voltage and rotor speed dynamics, were compared. The main outcomes ensured the effectiveness and superiority of the COA algorithm. Compared to the other reported techniques, it is superior in terms of convergence rapidity and solution qualities.