According to the working principle and structural feature of compressive packer, mechanic analysis of rubber tubes was done with adopting Mooney-Rivlin model. The contact stress between rubber tube and the casing and axial compression distance were figured out at 83MPa of the differential pressure between inside and outside string. The results show that the middle tube has the function of beginning to set the paker and the lower tube seals and separate the layers. Upper tubing should be installed the equipment to prevent shoulder protruding.

Submersible electric pump units are connected by bolts. This paper uses finite element analysis method to simulate how the pump joint bolt behave when it transmit torque.In this paper, temperature method is adopted to simulate the bolt preload and axial deformation.It also used to analyse and calculate the limited value when submersible electric pump units transmit torque under different preload. All of this provide the designing of connecting bolt preload and construction with theoretical basis.

With respect to the conventional coupling thread, the coiled tubing had the advantages of without screwing on and screwing off in the lifting pipe string. It was widespread used in the drilling and repairing well. According to the actual state of the coiled tubing, the mechanical models on the ground and in the wellbore were established in this article. The were able to simulate the contact state of the coiled tubing through the drum, the guide frame, the injector head and in the wellbore. The curves of the axial force that through the rollers, guide frame, injection head and wellhead was obtained with the changes of the depth.

Analyzes that the ammonia plant of a fertilizer between rich liquid line and ammonia synthesis tower of pressure pipeline vibrates some reasons, through the establishment of the pipeline and tower body vibration finite element model, the calculation of the existing constraints stress, vibration frequency and vibration form. By adding a support level and put forward the reconstruction plan of vibration reduction. Through many calculation and analysis, the weld seams stress reduced by 23.6%, the maximum amplitude dropped 98.5% and obtain the better vibration reduction transformation effect.

In the marine flatbed, nuclear power stations and oil fields, the marine risers and heat exchangers are induced vibrations and collision, even caused failure with cross flow. This is a typical problem of bundles vibration in fluid-structure interaction. In this paper, the elastic pipe was separated into several beam elements. And the dynamical equation was adopted to describe the structure. The fluid domain of cylinder was separated into solid elements. And the computational fluid dynamics equation was adopted to describe the fluid. At the fluid-structure coupling interface, the formulas of displacement, velocity and load was derived and the corresponding convergence criterion was also derived. Thus, the partitioned coupling algorithm was established for the elastic pipe and the cross-flow in cylinder. The example showed that, comparing to the results of monolithic coupling algorithm, the error was small. Thus, it proved that the correctness of the partitioned coupling algorithm in this article. And it will provide an effective computational method for vibrations and collision of bundles in a more complex fluid domain.