A common perception is that pasture-based, low-input dairy systems characteristic of the 1940s were more conducive to environmental stewardship than modern milk production systems. The objective of this study was to compare the environmental impact of modern (2007) US dairy production with historical production practices as exemplified by the US dairy system in 1944. A deterministic model based on the metabolism and nutrient requirements of the dairy herd was used to estimate resource inputs and waste outputs per billion kg of milk. Both the modern and historical production systems were modeled using characteristic management practices, herd population dynamics, and production data from US dairy farms. Modern dairy practices require considerably fewer resources than dairying in 1944 with 21% of animals, 23% of feedstuffs, 35% of the water, and only 10% of the land required to produce the same 1 billion kg of milk. Waste outputs were similarly reduced, with modern dairy systems producing 24% of the manure, 43% of CH(4), and 56% of N(2)O per billion kg of milk compared with equivalent milk from historical dairying. The carbon footprint per billion kilograms of milk produced in 2007 was 37% of equivalent milk production in 1944. To fulfill the increasing requirements of the US population for dairy products, it is essential to adopt management practices and technologies that improve productive efficiency, allowing milk production to be increased while reducing resource use and mitigating environmental impact.

Consumers often perceive that the modern beef production system has an environmental impact far greater than that of historical systems, with improved efficiency being achieved at the expense of greenhouse gas emissions. The objective of this study was to compare the environmental impact of modern (2007) US beef production with production practices characteristic of the US beef system in 1977. A deterministic model based on the metabolism and nutrient requirements of the beef population was used to quantify resource inputs and waste outputs per billion kilograms of beef. Both the modern and historical production systems were modeled using characteristic management practices, population dynamics, and production data from US beef systems. Modern beef production requires considerably fewer resources than the equivalent system in 1977, with 69.9% of animals, 81.4% of feedstuffs, 87.9% of the water, and only 67.0% of the land required to produce 1 billion kg of beef. Waste outputs were similarly reduced, with modern beef systems producing 81.9% of the manure, 82.3% CH(4), and 88.0% N(2)O per billion kilograms of beef compared with production systems in 1977. The C footprint per billion kilograms of beef produced in 2007 was reduced by 16.3% compared with equivalent beef production in 1977. As the US population increases, it is crucial to continue the improvements in efficiency demonstrated over the past 30 yr to supply the market demand for safe, affordable beef while reducing resource use and mitigating environmental impact.

Simple Summary The environmental impact of three beef production systems was assessed using a deterministic model. Conventional beef production (finished in feedlots with growth-enhancing technology) required the fewest animals, and least land, water and fossil fuels to produce a set quantity of beef. The carbon footprint of conventional beef production was lower than that of either natural (feedlot finished with no growth-enhancing technology) or grass-fed (forage-fed, no growth-enhancing technology) systems. All beef production systems are potentially sustainable; yet the environmental impacts of differing systems should be communicated to consumers to allow a scientific basis for dietary choices. Abstract This study compared the environmental impact of conventional, natural and grass-fed beef production systems. A deterministic model based on the metabolism and nutrient requirements of the beef population was used to quantify resource inputs and waste outputs per 1.0 × 10 9 kg of hot carcass weight beef in conventional (CON), natural (NAT) and grass-fed (GFD) production systems. Production systems were modeled using characteristic management practices, population dynamics and production data from U.S. beef production systems. Increased productivity (slaughter weight and growth rate) in the CON system reduced the cattle population size required to produce 1.0 × 10 9 kg of beef compared to the NAT or GFD system. The CON system required 56.3% of the animals, 24.8% of the water, 55.3% of the land and 71.4% of the fossil fuel energy required to produce 1.0 × 10 9 kg of beef compared to the GFD system. The carbon footprint per 1.0 × 10 9 kg of beef was lowest in the CON system (15,989 × 10 3 t), intermediate in the NAT system (18,772 × 10 3 t) and highest in the GFD system (26,785 × 10 3 t). The challenge to the U.S beef industry is to communicate differences in system environmental impacts to facilitate informed dietary choice.

Life-cycle assessment (LCA) is the preferred methodology to assess carbon footprint per unit of milk. The objective of this case study was to apply an LCA method to compare carbon footprints of high-performance confinement and grass-based dairy farms. Physical performance data from research herds were used to quantify carbon footprints of a high-performance Irish grass-based dairy system and a top-performing United Kingdom (UK) confinement dairy system. For the US confinement dairy system, data from the top 5% of herds of a national database were used. Life-cycle assessment was applied using the same dairy farm greenhouse gas (GHG) model for all dairy systems. The model estimated all on- and off-farm GHG sources associated with dairy production until milk is sold from the farm in kilograms of carbon dioxide equivalents (CO2-eq) and allocated emissions between milk and meat. The carbon footprint of milk was calculated by expressing GHG emissions attributed to milk per tonne of energy-corrected milk (ECM). The comparison showed that when GHG emissions were only attributed to milk, the carbon footprint of milk from the Irish grass-based system (837 kg of CO2-eq/t of ECM) was 5% lower than the UK confinement system (884 kg of CO2-eq/t of ECM) and 7% lower than the US confinement system (898 kg of CO2-eq/t of ECM). However, without grassland carbon sequestration, the grass-based and confinement dairy systems had similar carbon footprints per tonne of ECM. Emission algorithms and allocation of GHG emissions between milk and meat also affected the relative difference and order of dairy system carbon footprints. For instance, depending on the method chosen to allocate emissions between milk and meat, the relative difference between the carbon footprints of grass-based and confinement dairy systems varied by 3 to 22%. This indicates that further harmonization of several aspects of the LCA methodology is required to compare carbon footprints of contrasting dairy systems. In comparison to recent reports that assess the carbon footprint of milk from average Irish, UK, and US dairy systems, this case study indicates that top-performing herds of the respective nations have carbon footprints 27 to 32% lower than average dairy systems. Although differences between studies are partly explained by methodological inconsistency, the comparison suggests that potential exists to reduce the carbon footprint of milk in each of the nations by implementing practices that improve productivity.

The environmental impact of using recombinant bovine somatotropin (rbST) in dairy production was examined on an individual cow, industry-scale adoption, and overall production system basis. An average 2006 U.S. milk yield of 28.9 kg per day was used, with a daily response to rbST supplementation of 4.5 kg per cow. Rations were formulated and both resource inputs (feedstuffs, fertilizers, and fuels) and waste outputs (nutrient excretion and greenhouse gas emissions) calculated. The wider environmental impact of production systems was assessed via acidification (AP), eutrophication (EP), and global warming (GWP) potentials. From a producer perspective, rbST supplementation improved individual cow production, with reductions in nutrient input and waste output per unit of milk produced. From an industry perspective, supplementing one million cows with rbST reduced feedstuff and water use, cropland area, N and P excretion, greenhouse gas emissions, and fossil fuel use compared with an equivalent milk production from unsupplemented cows. Meeting future U.S. milk requirements from cows supplemented with rbST conferred the lowest AP, EP, and GWP, with intermediate values for conventional management and the highest environmental impact resulting from organic production. Overall, rbST appears to represent a valuable management tool for use in dairy production to improve productive efficiency and to have less negative effects on the environment than conventional dairying.carbon footprint ͉ environment ͉ greenhouse gas ͉ sustainability ͉ productive efficiency