Although several reports can be found in the literature about the recycling of plastic materials, only a few focus on recovering and molding them in a new process. Plastic material blends can be fabricated using several techniques, which allows the molding of a compound adaptable to each needed performance. This fact favors the recycling by allowing the use of mixed wastes without major processes, avoiding expensive treatments. This research work analyzes the mechanical properties of a material conformed by 100% recycled plastics: polyethylene terephthalate and low-/high-density polyethylene without previous separation or washing and drying pretreatments. Its macro and microscopic structure was studied and described, and formulations of different compound rates were analyzed. Mechanical resistance was around 60% of a material composed of virgin materials in compressive, flexural, and tensile strength tests. Its potential application to building components manufacture is analyzed.

The objectives of this research were to estimate the thermal transmittance and some physical-mechanical properties of a housing cover built with roofing tiles made from recycled plastics and rubber and compare them with three other traditional solutions for housing cover: ceramic roofing tiles, concrete roofing tiles, and zinc sheets. This roofing tile has technical advantages over the others, due to its higher thermal insulation, higher resistance to freezing, higher resistance to hail, higher flexural resistance, lower specific weight, and lower water absorption, with lower cost than the traditional glazed black ceramic roofing tile. And it is also friendlier to the environment.

No abstract