No abstract

Reductive dechlorination is a major degradation pathway of chlorinated ethenes in anaerobic subsurface environments, and reactive kinetic models describing the degradation process are needed in fate and transport models of these contaminants. However, reductive dechlorination is a complex biological process, where many microbial populations including dechlorinating, fermentative, methanogenic, iron and sulfate reducing, interact. In this article the modeling approaches and the experimental data needed to calibrate them are reviewed, classified, and discussed. Model approaches considered include first order kinetics, Monod kinetics to describe sequential reductive dechlorination and bacterial growth, and metabolic models which simulate fermentation and redox processes interacting with reductive dechlorination processes. The review shows that the estimated kinetic parameters reported vary over a wide range, and that experimental microbial data are scarce. Very few studies have been performed evaluating the influence of sulfate and iron reduction, and contradictory conclusions on the interaction of redox processes with reductive dechlorination have been reported. The modeling approaches for metabolic reductive dechlorination employing different descriptions of the interaction between redox and dechlorination processes and competition for hydrogen are classified. The current concepts lead to different results, suggesting a need for further investigations on the interactions between the microbial communities performing dechlorination and redox processes, including the establishment of biomarkers quantifying dechlorination, and on geochemical characterization. Finally, the relevance of laboratory data and the development of practical modeling tools for field applications are discussed.

The performance of enhanced reductive dechlorination (ERD) for in situ remediation of cis-1,2-dichloroethene (cDCE) and vinyl chloride in clayey till was investigated in a pilot test. A dilute groundwater solution containing emulsified soybean oil and Dehalococcoides bacteria was injected into a sand-filled hydraulic fracture. Fermentation of the ERD solution caused the establishment of a dechlorinating bioactive zone in the fracture within 1 month of injection. By 148 days, all the cDCE in the fracture was dechlorinated to ethene. Analysis of a clay core from Day 150 indicated that electron donor and fermentation products diffused from the fracture at least 10 cm into clay and that stimulated dechlorination occurred in the clay in the presence of Dehalococcoides (7.9.10(4) cells g(-1)). Comparison of chloroethene profiles in the Day 150 core to modeled diffusion profiles indicated degradation occurred in a bioactive zone extending approximately 5 to 6 cm into the clay matrix. These data suggest that a bioactive zone established in a sand-filled fracture can expand into the adjacent clayey till matrix and facilitate mass transfer from the matrix to the bioactive zone. These findings offer promise for ERD and support further development of methods for deploying ERD in clayey till and other low-permeability deposits.

The environmental impacts of remediation of a chloroethene-contaminated site were evaluated using life cycle assessment (LCA). The compared remediation options are (i) in situ bioremediation by enhanced reductive dechlorination (ERD), (ii) in situ thermal desorption (ISTD), and (iii) excavation of the contaminated soil followed by off-site treatment and disposal. The results showed that choosing the ERD option will reduce the life-cycle impacts of remediation remarkably compared to choosing either ISTD or excavation, which are more energy-demanding. In addition to the secondary impacts of remediation, this study includes assessment of local toxic impacts (the primary impact) related to the on-site contaminant leaching to groundwater and subsequent human exposure via drinking water. The primary human toxic impacts were high for ERD due to the formation and leaching of chlorinated degradation products, especially vinyl chloride during remediation. However, the secondary human toxic impacts of ISTD and excavation are likely to be even higher, particularly due to upstream impacts from steel production. The newly launched model, USEtox, was applied for characterization of primary and secondary toxic impacts and combined with a site-dependent fate model of the leaching of chlorinated ethenes from the fractured clay till site.