Active coherent beam combination using a 7-non-coupled core, polarization maintaining, air-clad, Yb-doped fiber is demonstrated as a monolithic and compact power-scaling concept for ultrafast fiber lasers. A microlens array matched to the multicore fiber and an active phase controller composed of a spatial light modulator applying a stochastic parallel gradient descent algorithm are utilized to perform coherent combining in the tiled aperture geometry. The mitigation of nonlinear effects at a pulse energy of 8.9 µJ and duration of 860 fs is experimentally verified at a repetition rate of 100 kHz. The experimental combining efficiency results in a far field central lobe carrying 49% of the total power, compared to an ideal value of 76%. This efficiency is primarily limited by group delay differences between cores which is identified as the main drawback of the system. Minimizing these group delay issues, e.g. by using short and straight rod-type multicore fibers, should allow a practical power scaling solution for femtosecond fiber systems.

We report on the first diode-pumped Yb:CaGdAlO4 regenerative amplifier in the sub-100-fs regime. It generates pulses at a central wavelength of 1047 nm with up to 24 μJ energy (after compression) at a repetition rate of 50 kHz. The measured pulse duration is 97 fs, with a spectral bandwidth of 19 nm. We describe in detail how nonlinear effects are optimally used to compensate gain narrowing in order to overcome the 100 fs barrier.