To achieve high direct current (DC) dielectric performance of crosslinked polyethylene (XLPE) applied for insulated cable, the auxiliary crosslinking agent of trimethylolpropane trimethacrylate (TMPTMA) is employed in photon-initiated crosslinking process to the present polar-molecular group which will introduce deep traps for charge carriers. The space-charge accumulation and electrical conductance of XLPE are observably suppressed due to the deep traps deriving from the TMPTMA crosslinkers that are chemically connecting (grafted onto) polyethylene molecules. Thermally stimulated depolarization current tests and first-principles calculations consistently demonstrate a trapping mechanism of impeding charge injection and carrier transport in XLPE with TMPTMA crosslinkers. The characteristic cyclic anhydrides with coupled carbonyl groups are used as auxiliary crosslinkers to promote crosslinking efficiency and provide polar groups to polyethylene molecules which can be effectively fulfilled in industrial cable production. The results of infrared spectroscopy show that the auxiliary crosslinkers have been successfully grated to polyethylene molecules through the UV-initiation process. The space-charge characteristics achieve a significant improvement consistent with the theoretical estimation that deeper electronic traps can be introduced by auxiliary crosslinker and will consequently suppress space-charge accumulation through a trapping mechanism. Meanwhile, the conductivity of XLPE observably increases after using TMPTMA auxiliary crosslinkers at various temperatures of cable operation. The first-principles calculations also demonstrate that substantial electronic bound states have been introduced at the band edge of polyethylene molecules crosslinked by TMPTMA, leading to reduction in electrical conductivity. On the advantage of ameliorating DC dielectric performance by way of UV-initiated crosslinking process, the present research suggests a substantial strategy in XLPE cable industrial productions.

Water-tree resistances of styrene block copolymer/polypropylene (SEBS/PP) composites are investigated by characterizing crystallization structures in correlation with the dynamic mechanical properties to elucidate the micro-structure mechanism of improving insulation performances, in which the accelerated aging experiments of water trees are performed with water-knife electrodes. The water-tree morphology in spherulites, melt-crystallization characteristics and lamella structures of the composite materials are observed and analyzed by polarizing microscopy (PLM), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM), respectively. Dynamic relaxation and stress-strain characteristics are specifically studied by means of a dynamic thermomechanical analyzer (DMA) and electronic tension machine, respectively. No water-tree aging occurs in both the highly crystalline PP and the noncrystalline SEBS elastomer, while the water trees arising in SEBS/PP composites still has a significantly lower size than that in low-density polyethylene (LDPE). Compared with LDPE, the PP matrix of the SEBS/PP composite represent a higher crystallinity with a larger crystallization size in consistence with its higher mechanical strength and lower dynamic relaxation loss. SEBS molecules agglomerate as a “island” phase, and PP molecules crystallize into thin and short lamellae in composites, leading to the blurred spherulite boundary and the appreciable slips between lamellae under external force. The high crystallinity of the PP matrix and the strong resistance to slips between lamellae in the SEBS/PP composite essentially account for the remarkable inhibition on water-tree growth.

As a key accessory of high-voltage (HV) insulated submarine cable, the factory joints of the cross-linked polyethylene (XLPE) represent an unpredictable uncertainty in cable-connecting fabrications by means of the extruded molding joint (EMJ) technique. The electrical breakdown pathways formed at the interfaces between recovery insulation and cable body under alternative current 500 kV voltages are specifically investigated by microstructure characterizations in combination with the electric field and fractal simulations. Dielectric-defected cracks in tens of micrometers in insulation interfaces are identified as the strings of voids, which dominate insulation damages. The abnormal arrangements of XLPE lamellae from scanning electron microscopy (SEM) imply that the structural micro-cracks will be formed under interface stresses. Electrical-tree inception is expedited to a faster propagation due to the poor dielectric property of interface region, manifesting as 30% lower of tree inception voltage. The longer free-paths for accelerating charge carriers in the cracks of interface region will stimulate partial discharging from needle electrodes. The carbonized discharging micro-channels arising in interface region illustrate that the partial discharging will be triggered by the electrical-trees growing preferentially along the defect cracks and could finally develop into insulation damages. The mechanism of forming cracks in the fusion processes between the molten XLPE of cable body and the molten cross-linkable PE of recovery insulation is elucidated, according to which the crack-caused degradation of insulation performance is expected to be alleviated.