The release of cyanobacterial toxins, such as microcystin-LR, in drinking water supplies is of increasing concern. In this study, we investigated the use of ultrafiltration (UF) combined with adsorption on powdered activated carbon (PAC) for the removal of microcystin-LR from drinking water. Process variables examined included PAC type, PAC dosage, membrane characteristics (material and pore size), and the presence of natural organic matter (NOM). Due to greater mesopore volume, wood-based activated carbon was up to 4-times more effective at removing microcystin-LR than coconut-based carbon, depending on contact time. Cellulose acetate (CA) membranes with a molecular weight cutoff (MWCO) of 20,000 Da did not reject or adsorb microcystin-LR. Membranes composed of polyethersulfone (PES) of similar pore size, on the other hand, adsorbed microcystin-LR presumably through hydrophobic interactions. A PES membrane with a MWCO of 5000 Da sorbed microcystin-LR, and also rejected 8.4% of the toxin through a size exclusion mechanism. When PAC was coupled to UF using PES membranes, greater removal of microcystin-LR occurred compared to when CA membranes were used due to sorption of the toxin to the PES membrane surface. The presence of Suwannee River fulvic acid (SRFA) reduced microcystin-LR removal by PAC-UF, primarily due to competition between SRFA and microcystin-LR for sites on the PAC surface.

No abstract

No abstract

Microcracking of type 304 stainless steel at 538°C has been studied, in particular, the initiation, growth and coalescence, of fatigue microcracks on smooth specimens via surface replicas and photomicrographs. Quantitative information, such as, initiation period, growth and coalescence behaviour, statistical distributions of crack length, density of cracks, distribution patterns and crack growth properties, were obtained. Knowledge of these parameters is critical for the application of fracture mechanics to fatigue life assessment and the damage evaluation of structures at elevated temperature.

Force feedback plays a very important role in medical surgery. In minimally invasive surgery (MIS), however, the very long and stiff bars of surgical instruments greatly diminish force feedback for the surgeon. In the case of minimally invasive robotic surgery (MIRS), force feedback is totally eliminated. Previous researchers have reported that the absence of force feedback increased the average force magnitude applied to the tissue by at least 50%, and increased the peak force magnitude by at least a factor of two. Therefore, it is very important to provide force information in MIRS. Recently, many sensors are being developed for MIS and MIRS, but some obstacles to their application in actual medical surgery must be surmounted. The most critical problems are size limit and sterilizability. Optical fiber sensors are among the most suitable sensors for the surgical environment. The optical fiber Bragg grating (FBG) sensor, in particular, offers an important additional advantage over other optical fiber sensors in that it is not influenced by the intensity of the light source. In this paper, we present the initial results of a study on the application of a FBG sensor to measure reflected forces in MIRS environments and suggest the possibility of successful application to MIRS systems.